schema
and yes i'll post the schematics of aman's Wedding and YOU are invited
sir stewin sorry for the mistake but its MARRIEGE (Wedding Of Aman Khalsa)hey guys post the schema of the MARAAGE and keep the DIY spirit up
and yes i'll post the schematics of aman's Wedding and YOU are invited
my new class D amp working fsw @250KHz mosfet IRFP250N use drum coil 19.5swg wire
Its very cool and clear sound
Regards
MANOJ
Hi !! andrewlebon ,
I am trying to build your IRS-1500 V 2 PCB ,but i don't have any experience of making PCBs ,what is the recommended paper that can be used to 'toner transfer' the pcb artwork on to the copper board?
I am trying to build your IRS-1500 V 2 PCB ,but i don't have any experience of making PCBs ,what is the recommended paper that can be used to 'toner transfer' the pcb artwork on to the copper board?
Ok here we go with fixAndrew pcb full with balanced input,limiter,and filter from Irvynejay (a clon qsc input)exelent job please share the pcb for diyers Irvy
Attachments
Hi All
Very happy to know that every one interested my schematic.please wait i will give to every one.I already given to one user and waiting for feedback.I tested my design 35V,42V 53V,60V,72V and 77V its working great.
Regards
MANOJ
Very happy to know that every one interested my schematic.please wait i will give to every one.I already given to one user and waiting for feedback.I tested my design 35V,42V 53V,60V,72V and 77V its working great.
Regards
MANOJ
Attachments
is this the same one http://www.diyaudio.com/forums/attac...ets-ucd625.pdf
Hi stewin,
No. my new schematics is rev.3.0 all features except volume limitter
Balanced input , over current protection (-ve rail & +ve rail supply) DC protection,Temp. protection
Regards
MANOJ T.M
- Home
- Amplifiers
- Class D
- UCD 25 watts to 1200 watts using 2 mosfets