GM my friend hv just ordered a pair of them. GM with high qts is it possible to build the tapped horn.
friends update my pics when mbp46 make a job in ordination ceremony day. my friend did use mbp46+the old bp6. the both works great. ok can make a little money for a little job.
the pic when put the c18-650 in mbp46. the magnet hits the panel a little. who want to build for PA try to consider.
about 3 months ago. my lovely friend on here sent me the tsw-218 sketch up. they measure the dimension from the original turbosound. i try to see the constructures of it. make me wonder when i see the 3 mm wood which the bend for expansion flare horn and two expansion flare horn are in two boxes are difference, friends u can see the pic.
i devide the 2 parts change to one. this's the plan of it and i change the thick mdf 3mm to 18 mm. the finish 0.5 tsw-218 pics ill post the next time
built the 0.5 tsw-218 last week. and install 2242 new series,it works pretty good. some plans only built for testing when was finished sometime the mdf of the boxes will be cut again for to rebuilt another plan. because want to test for every diy people in thailand. but 0.5 tsw-218 my friend has just sold them.
Up to a point, though its usable BW decreases with increasing Qts, so for wide BW, a very low Qts is required.
GM
Some very nice Subwoofers here. Maybe you guys like this Subwoofer Horn: https://www.youtube.com/watch?v=llLS_k0QwOY
Can some of you post some videos showing the making or playing of your cabinets ?
Can some of you post some videos showing the making or playing of your cabinets ?
one the new project that to build. i make this plan for many friends who don't have much money but want to build the tapped horn. many problem with the driver with the low price. most of them only have the short xmax. many friends use P audio EU series. the P audio EU series only sold in thailand. because they want to share in low market.
´Í¡ÅÓ⾧ P.AUDIO EU-15P/300LM 15¹ÔéÇ ¾ÕÍÍ´ÔâÍ ¡ÅÒ§á¨é§ ¢Ò ÃÒ¤Ò
i consider about the design and see the mth 46LC ok think to downscale for the 12" drv. the plan is fininsh please see the pics. this project i hope will archive. so that i order the barbecue before the beer will come when finish it.
Thanks: ฝากรูป
´Í¡ÅÓ⾧ P.AUDIO EU-15P/300LM 15¹ÔéÇ ¾ÕÍÍ´ÔâÍ ¡ÅÒ§á¨é§ ¢Ò ÃÒ¤Ò
i consider about the design and see the mth 46LC ok think to downscale for the 12" drv. the plan is fininsh please see the pics. this project i hope will archive. so that i order the barbecue before the beer will come when finish it.
An externally hosted image should be here but it was not working when we last tested it.
Thanks: ฝากรูป
GM apology quickly to respond i don't know the time that u come to. ok i know and have a question to ask u. now i design tha tapped horn. i design for 15 drv. the ratio about 1.3 the 15"drv graph will ok. i'm satisfy the low. Gm i just wonder when i try to sim with the 18" drv. the ratio about 1.9, it works well as the same. is it problem if i do the both drvs with this box? and any problem? it only increase 1-2 db, sorry my tha tapped horn isn't beautiful. my idea that when listen it,i will my friend to close his eyes.
Attachments
Last edited:
stimmedmarine i ever did the video but its very shaking. i feel i'm not good for this. thanks 4 the comment.
??
Don't know, it will depend on the 18" driver's construction [cone, suspension stiffness] and how much power it will need to handle. For HIFI/HT it will probably be fine, but high power PA....... ? Only one way to know for sure.
GM
ok if i have a time. make video like this link. put the music background like them. thai Language at the start+lao Language at the end. wonderful music background. very sad song(broken heart) but can dance.LOL it often be like this. never listened a long time. feel good to hear the "wot instrument" and "Lai Khaen" wonderful music instrument from lao+thai again. on video i think the product make Northeast of thailand(near lao,they speaker lao) stimmedmarine funny with the video.i know u like the video.
?????????? ???? - YouTube
thanks GM i didn't mean to install the 15 drv and the 18 drv as the same time in this box. today i compare the simulation with cyclops cbx ok i'm satisfy. the dimension is h*d*w= 85*83*66 cm will ok. i think ill use the 18 drv more than 15" and think adjust the dimensions for 15 in the next time.
Attachments
after i was design the hd18 for my friend last month. it worked good when played with the rcf esw1080. after that time i began to design hd12. i think it may be good for indoor. but don't know my friend will want. ok if we built i will post the pics.
Thanks for the video Thawach 🙂 i liked it, alot of woofers there, and you live in a totaly different world than mine ^^. The song is greate, i will search for that someday wanting to relax