Whatever has good construction and logical price that appeals to you. Don't follow the ''hi-end'' mantra regarding cabling and connectors is my humble opinion. Save funds for constructing right height supports or to make any crossover tweaks in the future if you don't like something in your system/room acoustics/preference context would be my 2C.
I have a Simaudio Moon w-3 power amplifier (2x125W 8Ohm, 250W/4Ohm).
No problem handling the speakers in my opinion.
http://www.simaudio.com/moonw3.htm
No problem handling the speakers in my opinion.
http://www.simaudio.com/moonw3.htm
Last edited:
I liked what I read online, and it seems a sturdy quality tweeter. Only negative I have read about it is a slight raise of level around 4kHz or something like that, but some say it is not necessary to fix this with the cross over, some say you should. The big picture seem to be a good quality tweeter with nice sound, good extention uppwards and a reasonable price.
Try this:
... putting a piece of MDF behind front panel. Radius of the back panel would be the same as the inner radius of the front panel. This is just simple task of adding more material so that you have something to mount T-nuts in.
An externally hosted image should be here but it was not working when we last tested it.
... putting a piece of MDF behind front panel. Radius of the back panel would be the same as the inner radius of the front panel. This is just simple task of adding more material so that you have something to mount T-nuts in.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- "Tired2way" speaker building.