• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

The Wolverine 5th Group buy

Jump to Latest
#165
Not sure, I'm not knowledgeable enough to read the schematic, and there are no specifications anywhere in the documentation. The documents mention 1V output a few times, so I think it's just a little shy on power for Wolverine. Someone else here will know where to point you (I don't use preamps) 🤓
 
#167
EF3-3 V5 prototype up and running!

20250426_101249339_iOS.jpg
 
  • Like
Reactions: Dr_Strangelove, furnman487, OhSoJoe and 1 other person
#168
Hi Guys,

We’ve got some fantastic news for the Wolverine 5th Group Buy! A huge shoutout to Gianluca from ModuShop for stepping up to support our project in a big way. Not only is ModuShop offering a 5% discount on all 3U, 4U, 5U Dissipante and Mini Dissipante chassis, but Gianluca is also providing custom heatsink drilling for the following Wolverine board patterns at no extra cost:

  • EF3-3: TO3P, TO264
  • EF3-4: TO3P, TO264, MT200
  • EF3-5: TO3P, TO264
This means you can get a perfectly tailored chassis for your Wolverine build—whether you’re rocking the new EF3-5 or classic EF3-3/EF3-4 setups—with holes drilled to match your chosen output transistors.

To grab this deal:
  1. Visit the ModuShop Chassis Collection.
  2. Use the discount code DIYWOLVHF2K at checkout to enjoy the 5% savings.
  3. Specify your desired drilling pattern on the website (EF3-3, EF3-4, or EF3-5, with TO3P/TO264/MT200 as needed).
This is an incredible opportunity to elevate your build with a top-notch chassis at a discount, all while supporting a company that’s backing our Wolverine community. Let’s give a big thank you to Gianluca and ModuShop for making this happen!

If you have questions or need help with your chassis order, drop them in this thread or reach out to me at stuartmp@internode.on.net. The 5th Group Buy is shaping up to be our best yet—thanks for your enthusiasm!

Best regards,
Stuart (stuartmp)
Wolverine Team
 
Last edited:
  • Like
Reactions: Dr_Strangelove, hcpower, Gianluca and 7 others
#169
"Not only is ModuShop offering a 5% discount on all 3U, 4U, 5U Dissipante and Mini Dissipante chassis, but Gianluca is also providing custom heatsink drilling for the following Wolverine board patterns at no extra cost:"

Hi Stuart,

Great news indeed!

I do have a question though, it looks like adding the Wolverine drill pattern to a 4U 400mm case adds 70€.
Is this correct?
 
  • Like
Reactions: Dr_Strangelove and asuslover
#171
And for anyone with existing "standard" diyaudio UMS heatsinks:

For 1 Channel. All boards have some common holes that line up with UMS so getting started with the PCB as a template is easy.

300mm deep:

EF3-3 with TO-3P outputs - no drilling required
EF3-3 with TO-264 outputs - 6 additional holes (outputs)

400mm+ deep:

EF3-3 with TO-3P outputs - no drilling required
EF3-3 with TO-264 outputs - 6 additional holes (outputs)
EF3-4 with TO-3P outputs - 6 additional holes (pcb and drivers)
EF3-4 with TO-264 outputs - 14 additional mounts required (pcb, drivers and outputs)
EF3-4 with MT-200 outputs - 22 additional mounts required (pcb, drivers and outputs)
EF3-5 with TO-3P outputs - 16 additional mounts required (pcb, drivers and outputs)
EF3-5 with TO-264 outputs - 16 additional mounts required (pcb, drivers and outputs)
 
  • Like
Reactions: Dr_Strangelove and stuartmp
#177
Gianluca said:
Thanks for the detailed information post Stuart! The coupon gives a flat 12,5% discount to all the 400mm deep Dissipante/MiniDissipante chassis and Wolvering heatsinks substitution (which is 60 EUR and not 70)
Click to expand...
In my case, the coupon deducted 41 EUR for the 5U Dissipante + baseplate + substitution back panel + heatsink substitution + set of four feet.

Am I missing something?
 
#179
Hi all, I noticed in the diyAudio Shop that there is a new chassis for sale: the

2025 Deluxe Chassis - 5U​

with the option of engraving the front plate with a "PASS diy" logo, some waves and lines and two holes for LEDs.

Does Modushop offer this option as well for their 5U Deluxe chassis?

Cheers,
Wouter
 
You must log in or register to reply here.
Top Bottom