Hop!Nice work!
Can you share the pcb and schematic for psu?
Can you share the pcb for buffer?
Attachments
Hop!
Project, can you share the Sprint-Layout file for this power supply?
What style or brand of transformer fits on the board?
Thanks...
Hello ammel68!
I used this transformer.
https://www.reichelt.de/Transformer...33&ARTICLE=2483&START=0&SORT=artnr&OFFSET=500
For the sprint layout file is importing gerber because originally the layout has been designed with DesignSpark.
I used this transformer.
https://www.reichelt.de/Transformer...33&ARTICLE=2483&START=0&SORT=artnr&OFFSET=500
For the sprint layout file is importing gerber because originally the layout has been designed with DesignSpark.
Attachments
For a friend I made an RIAA equalizer with a beautiful sound but lacked a little "punch" (a little too flat). So we tried the Kuartlotron between the RIAA corrector and line input preamplifier and immediately the sound gained dynamics.Could you please reword that last bit? Im confused about what you meant.
I hope this is clear (online translation)
Is this for me?Can you list the exact parts you used? Is this before trimming?
Look all transistors bc550c,bc560c by fairchild.
Farther test using Right Mark audio analyzer
Attachments
Last edited:
I can post a sound card loop test.Not a bad result. Can you tell which harmonics are from the soundcard and which are from the Kuartlotron?
Here .With ARTA & with SpectraLab
Attachments
Last edited:
- Home
- Source & Line
- Analog Line Level
- The Kuartlotron - keantoken's simple error-correction superbuffer