Attachment test.
This started out as an attachment test. It works !!!
Pierre was asking about my system that I offered to bring to the get together this year.
In the mid nineties this was a 2 way system with a passive crossover. It started life as a Pispeakers.com design of Wayne Parham who sends designs to people for free and then helps them on his forum when they need it.
The system is set up as a 3 way system today with an active crossover, 4 channels of ClassD Audio power for the lows (15 inch) and mids (8 inch horn loaded) , and an SMSL 3116 based amp for the top end (1" compression drivers). I use Spotify for source just about all the time these days and have a Musical Fidelity V90 Dac.
Hopefully some people at the get together this year will enjoy it as much as I do.
Grant.
This started out as an attachment test. It works !!!
Pierre was asking about my system that I offered to bring to the get together this year.
In the mid nineties this was a 2 way system with a passive crossover. It started life as a Pispeakers.com design of Wayne Parham who sends designs to people for free and then helps them on his forum when they need it.
The system is set up as a 3 way system today with an active crossover, 4 channels of ClassD Audio power for the lows (15 inch) and mids (8 inch horn loaded) , and an SMSL 3116 based amp for the top end (1" compression drivers). I use Spotify for source just about all the time these days and have a Musical Fidelity V90 Dac.
Hopefully some people at the get together this year will enjoy it as much as I do.
Grant.
Last edited:
Thank you Grant. This is terrific. The pictures turned out well 🙂.
I for one am very interested in a demo of your system, and particularly curious about the "voicing" you have settled on after living with it over a period of years.
Cheers - Pierre
I for one am very interested in a demo of your system, and particularly curious about the "voicing" you have settled on after living with it over a period of years.
Cheers - Pierre
Thank you for your note (for me), Mark. And thank you, Pierre, for posting the decisions so quickly.
Obviously, you guys are better decision-makers when I'm not there.
Looking forward to our get-together.
(PM to Pierre)
- Ron
Obviously, you guys are better decision-makers when I'm not there.
Looking forward to our get-together.
(PM to Pierre)
- Ron
Hi all,
Putting together the promotion list. A few issues, like the calendar on this site doesn't take 2016 dates yet!
Everyone's busy working on projects for the event, right? 😉
John
Putting together the promotion list. A few issues, like the calendar on this site doesn't take 2016 dates yet!
Everyone's busy working on projects for the event, right? 😉
John
Is there any interest or need in having a group chat for planning or discussion?
We could setup a 'Slack' channel for this (I don't care for it, but it's very accessible to many folks). Or my personal preference - IRC (though I can appreciate this may be a barrier of entry for many).
I'm happy to do the leg work setting this up if it's something folks think is a good idea.
----------
One other thing that I would be happy to do if folks want is setup a ottawa diyaudio website for pictures and other information.
We could setup a 'Slack' channel for this (I don't care for it, but it's very accessible to many folks). Or my personal preference - IRC (though I can appreciate this may be a barrier of entry for many).
I'm happy to do the leg work setting this up if it's something folks think is a good idea.
----------
One other thing that I would be happy to do if folks want is setup a ottawa diyaudio website for pictures and other information.
Thanks for the offer, jj. I'm fine with continuing to use this forum as the main channel of communication.
Me to.
California says hello.
A freezing 17 above today. Yesterday was 22.
Nah nah! 😀
First time in almost twenty years I have been somewhere warm in the winter.
Had to rub it in a little!
Running a booth at the NAMM show with a friend of mine.
California says hello.
A freezing 17 above today. Yesterday was 22.
Nah nah! 😀
First time in almost twenty years I have been somewhere warm in the winter.
Had to rub it in a little!
Running a booth at the NAMM show with a friend of mine.
Hello back California.
I hope you're seeing some nice toys !!! It will be interesting to hear about.
Grant.
Oh I am. And coming back to good old Canada in a few days.
I'll be at this years meet for a certainty.
I'll be at this years meet for a certainty.
We're making good progress moving things forward, but now need some help set up a mailing list for organizing this event. Can anyone lend a hand? This will be used to collect input and to organize details.
Please PM me here if you can help set up a mailing list, so we can get this off the ground!
Thanks,
Dave
Please PM me here if you can help set up a mailing list, so we can get this off the ground!
Thanks,
Dave
We have created a google group mailing list.
If you haven't been invited send me a private message here with your email and I will invite you to the group!
If you haven't been invited send me a private message here with your email and I will invite you to the group!
We're doing things a bit differently this year. If you have any gear you want to show off, please contact Justin and he'll set you up in the group list. From there we have a google docs sign up sheet where anyone
- bringing gear
- giving a talk
- requesting a talk
- requesting anything measured
needs to enter their specifics in the sheet (<5 mins task)
This way we can pretend to be organized this year. 🙂
- bringing gear
- giving a talk
- requesting a talk
- requesting anything measured
needs to enter their specifics in the sheet (<5 mins task)
This way we can pretend to be organized this year. 🙂
- Status
- Not open for further replies.