i looked in my stash of sub plans andAnyone that has a 3d file of the design (first version)?
i found the last iteration of it drawn by Deman, if you want it let me know,
it is a fusion file, and 2 dxf files CNC ready that have all the panels and bracings
and i found the original plans that do not have the cone correction
but is a PDF, see 4th pic from top to bottom.
Correct! I should have stated a 327CID V8.327 liters is 19,955 cubic inches.
A Chevy small block V8 has 327 cubic inch displacement, 5.36 liters.
The air volume occupied (filled) by the Bianco-18SW450 driver is 7.32 liters, 447 cubic inch.
It would be something if subwoofers could handle the horsepower a car engine can produce..
But, they are BOTH all about bore x stroke and moving air!i guess, cylinders and pistons are metal !, drivers have paper cones , even kevlar ones can't match a V8!!
The DXF files have specific layers outlining the beveled edges but you'll need to have these added manually after the CNC work.
Getting CAD Files into CAM and creating the actual G-Code always depends on the CNC and the used CAM Software - its best to talk to the CNC operator before working on files to getthe data format in a form he/she can use them best.
i looked in my stash of sub plans and
i found the last iteration of it drawn by Deman, if you want it let me know,
it is a fusion file, and 2 dxf files CNC ready that have all the panels and bracings
and i found the original plans that do not have the cone correction
but is a PDF, see 4th pic from top to bottom.
View attachment 1441205
View attachment 1441206
View attachment 1441207
View attachment 1441208
hi max, i would like to build a couple of these th18. your files would save me a lot of time, since you also have the cnc files ready. Unfortunately i can't write you privately because i'm a new member. If you wrote me i would be very grateful!i looked in my stash of sub plans and
i found the last iteration of it drawn by Deman, if you want it let me know,
it is a fusion file, and 2 dxf files CNC ready that have all the panels and bracings
and i found the original plans that do not have the cone correction
but is a PDF, see 4th pic from top to bottom.
View attachment 1441205
View attachment 1441206
View attachment 1441207
View attachment 1441208
Thanks a lot
Check your inbox. If you wrote me i would be very grateful!
- Home
- Loudspeakers
- Subwoofers
- TH-18 Flat to 35hz! (Xoc1's design)