Dears,
🙂 😀
Nice one Renato!
I love PHL as mid-range drivers, especially the 6.5-inch ones.
Last edited:
My open baffle is ready.
Sonido sfr200 SCW 400 and fountek cd3 in place of Fostex.
https://m.youtube.com/watch?v=9WSBChQiBZg
https://m.youtube.com/watch?v=uqkQ05X8Ro4
Sonido sfr200 SCW 400 and fountek cd3 in place of Fostex.
https://m.youtube.com/watch?v=9WSBChQiBZg
https://m.youtube.com/watch?v=uqkQ05X8Ro4
Very nice, congratulations! Do you have some more pictures taken along the way of building them?
Yes, I do but can only download one at the time.
Might start a new thread with all details. Time depending.
Attachments
Please do post a thread! One can also upload the pictures to a third party site like photobucket and hotlink them from there without a limit per post.
Here's my contribution. Horn loaded pleasure at all octaves, 2-way synergy horns spiced with a horn loaded super tweeters and push-pull tapped horns. 2x BMS 18N860, 2x Eminence Deltalite II 2515, JBL 2446J, Visaton TL16H supertweeters.
An externally hosted image should be here but it was not working when we last tested it.
Legis,
Could you post a few more pictures and comments about your speakers?
Very interesting!
Best Regards,
TerryO
Could you post a few more pictures and comments about your speakers?
Very interesting!
Best Regards,
TerryO
Here's couple more pics.
And the build thread, despite the title, is here (first 10-15 pages are mostly simming different TH's/Tapped pipes and front horns for Deltalites): http://www.diyaudio.com/forums/subwoofers/258706-study-dipole-cardioid-bass-horn-36.html#post4050828
Sure they are related ("finalized" speakers vs. random build progress pictures), what confuses you? In the first picture the spot lights hide the throats of the synergy horns. Here's a picture showing the back chambers of Deltalites:
Last edited:
Everything is made out of birch plywood, I don't use mdf. 🙂
That unpainted box is a tapped horn showing the push-pull BMS 18N860 drivers and the path/folding scheme. They are the white boxes right under the red synergy horns in the first picture.
I'm lost here, please tell what you think is different? The tapped horn is just facing upwards in the previous pre-paint picture (and obviously does not have the top sheet of plywood attached) whereas it's laying in the system picture. Here's couple more picures of them before and after painting (they are 100cm x 100cm x 60cm, one only sees the mouth area):
Also now when looking, in the first pictures there are Argent Roon Lense imitaitons made out of aluminum pipes. They are not part of the speakers. 🙂
Last edited: