I tried at the beginning of the part two but I asked in the part one too.
I made a reduced group and I got two quads very close matched. jama do trace plenty of curves of all and with his help I did get a did get a good results with a CSX1.
Ask jama, he has a very good tracer with the idea of Mike's Franquenstein one.
Best Regards
I made a reduced group and I got two quads very close matched. jama do trace plenty of curves of all and with his help I did get a did get a good results with a CSX1.
Ask jama, he has a very good tracer with the idea of Mike's Franquenstein one.
Best Regards
Sounds about right from what we've all heard, but Nelson Only Knows for sure and we don't want to nag him😉. I'm just doing what I'm told! However we ARE going to include brackets for mounting the PCBs and TO-3 devices because most chassis' aren't set up to accommodate this, and we'll make sure you won't have to match the VFETS because, how could you?
Mark
Mark
Many thanks for the pictures and updates. I am going to do my best to snag a kit when they become available. I have been wanting to hear a SIT for a long time.
Not for this thread, excuse me guys, but Nelson I am loving the M2 with my horns out of all the 7 or 8 amps I have built including the 3 SET's.
Not for this thread, excuse me guys, but Nelson I am loving the M2 with my horns out of all the 7 or 8 amps I have built including the 3 SET's.
We'll have advance sign-ups and purchase. They will be announced here. I have little doubt that if you sign up when they are announced, that you will get the parts.
Quivering with anticipation. Thanks for the work, all that are involved.
(previously stated nearly a 2 month wait remains however)
(previously stated nearly a 2 month wait remains however)