Yes I confused with load resistor, Villa cost a bargain only 40.000.000€ instead 95.000.000 CR9.....start to imagine playing togheter Messi, Iniesta, Villa will be unforgetable like Nat King Cole!!!!!Can't be 150, merlin.... Those are yhe millions paid by Barca to get Villa !
Nice hifi 2000 enclosure, Salas. Galaxi Maggiorato 33 x 23 x 8 cm I guess
Solid Alu top and bottom cover?
I wonder the two XLRs.....
If Mike can do the last favour to Salas can change the Alu cover for "corian"
40 millions before the South Africa, now Valencia will ask the difference!
Thanks God you don't have Xavi too..... Yesterday was superb!
We have Xavi Xabi Alonso is from R.Madrid, now we try to get Cesc Fabregas, remember we have also a 1st class midfield Busquets
Merlin:
Single 1.2 makes it 90% near to two and since I use humble parts from my hobby stash in this 4 JFET, doubled up cascode test build with B1 tail and 22k RIAA, I am not nervous about perfection. Probably many things to tune before parts. Filter capacitors are 10mF-10R-10mF 63V Samwa CRC, nothing special at all, the RIAA caps are NP0 ceramics, the coupling caps are CCCP and no name China, cabling will be no name Italian RG-179 impersonator, the resistors are metal film from deep inland China probably.
Massimo:
Yes, Italian enclosure, sides, front and back Alu, top & bottom ferromagnetic.
Will wire two pseudo balanced XLR parallel outputs to have easy interface to balanced gear without resorting to adapters.
Single 1.2 makes it 90% near to two and since I use humble parts from my hobby stash in this 4 JFET, doubled up cascode test build with B1 tail and 22k RIAA, I am not nervous about perfection. Probably many things to tune before parts. Filter capacitors are 10mF-10R-10mF 63V Samwa CRC, nothing special at all, the RIAA caps are NP0 ceramics, the coupling caps are CCCP and no name China, cabling will be no name Italian RG-179 impersonator, the resistors are metal film from deep inland China probably.
Massimo:
Yes, Italian enclosure, sides, front and back Alu, top & bottom ferromagnetic.
Will wire two pseudo balanced XLR parallel outputs to have easy interface to balanced gear without resorting to adapters.
Merlin:
Single 1.2 makes it 90% near to two and since I use humble parts from my hobby stash in this 4 JFET, doubled up cascode test build with B1 tail and 22k RIAA, I am not nervous about perfection. Probably many things to tune before parts. Filter capacitors are 10mF-10R-10mF Samwa CRC, nothing special at all, the RIAA caps are NP0 ceramics, the coupling caps are CCCP and no name China, cabling will be no name Italian RG-179 impersonator, the resistors are metal film from deep inland China probably.
Massimo:
Yes, Italian enclosure, sides, front and back Alu, top & bottom ferromagnetic.
Will wire two pseudo balanced XLR parallel outputs to have easy interface to balanced gear without resorting to adapters.
OK now I understand it's a prototype, sorry seems too perfect to be a proto!!!
Only one TX?
How can do two pseudo balanced XLR parallel outputs?
If Mike can do the last favour to Salas can change the Alu cover for "corian"
But corian isn't shielding the circuit.... Copper can be a very good material thanks to its electrical and mechanical proprieties. In that enclosure it can be used up to 4 mm thick, about 2.5-3 kgs each sheet.... expensive (nearly 10€/kg the raw material) !
But if Salas wants, I can have the sheet cut to measure easily
We have Xavi Xabi Alonso is from R.Madrid, now we try to get Cesc Fabregas, remember we have also a 1st class midfield Busquets
But corian isn't shielding the circuit.... Copper can be a very good material thanks to its electrical and mechanical proprieties. In that enclosure it can be used up to 4 mm thick, about 2.5-3 kgs each sheet.... expensive (nearly 10€/kg the raw material) !
But if Salas wants, I can have the sheet cut to measure easily
Thanks Massimo for your kind offer. This a test build. I will let you know when I will be making the final ''Midas'' version.
Merlin:
Single 1.2 makes it 90% near to two and since I use humble parts from my hobby stash in this 4 JFET, doubled up cascode test build with B1 tail and 22k RIAA, I am not nervous about perfection. Probably many things to tune before parts. Filter capacitors are 10mF-10R-10mF 63V Samwa CRC, nothing special at all, the RIAA caps are NP0 ceramics, the coupling caps are CCCP and no name China, cabling will be no name Italian RG-179 impersonator, the resistors are metal film from deep inland China probably.
Massimo:
Yes, Italian enclosure, front and back Alu, top & bottom ferromagnetic.
Will wire two pseudo balanced XLR parallel outputs to have easy interface to balanced gear without resorting to adapters.
But corian isn't shielding the circuit.... Copper can be a very good material thanks to its electrical and mechanical proprieties. In that enclosure it can be used up to 4 mm thick, about 2.5-3 kgs each sheet.... expensive (nearly 10€/kg the raw material) !
But if Salas wants, I can have the sheet cut to measure easily
Corian + shelf adhesive Mu-metal will be mine 1st choice less expensive & IMHO more effective.
Thanks Massimo for your kind offer. This a test build. I will let you know when I will be making the final ''Midas'' version.
In Spain "Midas" is like say "gold" perfect name for your final version
RIAA resistors
R4 6K81
R3 45K804
R5 1Meg
Run the sim, you can use 15n, but fit 1Meg parallel to 6K81 too.
run the sim, you can use 15n, but fit 1meg parallel to 6k81 too.
Χάρη
In Spain "Midas" is like say "gold" perfect name for your final version
Big plans for meta crisis lavish version.
Attachments
Χάρη
mmm... better ευχαριστώ (πολύ)
Do you prefer Spain vs. Germany or Argentina (Messi shooting at Casillas, but all 'n all he's from Real....)
How can do two pseudo balanced XLR parallel outputs?
Signal to pin 2, GND to pin1 & 3.
mmm... better ευχαριστώ (πολύ)
Do you prefer Spain vs. Germany or Argentina (Messi shooting at Casillas, but all 'n all he's from Real....)
I am pro Latin both sides of the pond. Both in music and football. In a soul league of their own.
- Home
- Source & Line
- Analogue Source
- Simplistic NJFET RIAA