Simple, no-math transformer snubber using Quasimodo test-jig

I don't have the second channel on. I am reading this with only the channel 1 probe hooked up. I now have a relatively stable wave form at 2 volts/division and 1us/division. But the waveform is to the extreme right of the screen, and the horizontal position knob will not let me move it to the left.

I don't understand what the channel 2 probe would be reading. I'll go back to Mark's abstract and re-read what it says about it. But I thought he said you could get a reading with just one channel.

Thanks,

John
 

Attachments

  • IMG_0181.jpeg
    IMG_0181.jpeg
    1 MB · Views: 6