I bought mechanism witch SONY logo, mayby orginal.. drillet puck. And laser dont work cant see tracks, i have seen lasser beam. Optics move, but dont se tracks.
Yes i have change ribbon cable and remove solder point on laser head. I have next kss213c, same one like from photo. It works but it work like he dont have power, when i hit on table it loose track, when i put more than fiveth sixth track or more it is loosing track and optics are vibrating. From my friend i have rotel 971 cd and it have same kss213c laser, works well, but it to loose tracks when i hit table, of corse not much! On sfp101n it works and even hiting table dont impres it. Mayby shigariki dont have much power for kss?
CD/VCD PICKUP SPECIFICATIONS MODEL:KSS-213C(FOR KSM-213CCM)
https://www.farnell.com/datasheets/1944121.pdf
https://www.farnell.com/datasheets/1944121.pdf
Okey i have next kss213 laser head, this time B version. I have put in in kss213 mechanics . It work but still some problems witch higher tracks. For example 10 track thr lasser have problems and it is searching. And dont se more than 10trakcs on this,So i have hited a littlem on top of the cd puck so it gets litle lower. For now it see all 17 tracks and works better. But what is a reference distans from cd to mechanical sheet metal?
Hello, I have a complete level 2 Shiga MkII for sale. If interrested I can sent more details.
Regards,
Robert
Regards,
Robert
I'm still looking for, preferably just the board with the display and basic parts, If anyone has a prposal please write on jaskierster@gmail.com
GERBER file would be also fine to me. Or at least nice clean drawing or photo of naked BCB, could somebody give ma contact to iTiberius ?
Use a private message, click on their name and choose "start conversation".
The "report" is only used for reporting bad behavior.
The "report" is only used for reporting bad behavior.
I will buy a working BlackShiga or WhiteShiga, without a housing it may be without a power supply, a transformer as long as it works. It may also be the motherboard itself, or just a bare printed circuit board, urgently
I would like to buy a display for Shigaclone by Tibi MKI or MKII, white LCD, if anyone has it and doesn't need it, please send me a message.