These were bought for my Badger build, but I have to do a bunch of med testing, so my mind/heart isn't in it right now. I'm sorry X, I wanted to be one of the first to get you some thoughts and data.
JT
JT
No worries, JT. Good luck on your medical tests!
Honey Badger is a nice powerful amp and a good one to have a SSR protection circuit on.
Honey Badger is a nice powerful amp and a good one to have a SSR protection circuit on.
Not yet. Mine is slated for an Adcom GFA 585LE, but I need to order header pins and sockets for the instant-off board. I have a cabinet full of Molex connectors - not one of them is correct.
Thanks, X - I would have to order JST connectors as well. I have 3 projects on deck for parts orders!
Someone sent me a PM asking what are the Mouser part number for Faston tabs for the speaker out/amp in and the 2-pin Molex KK housings needed for connecting the power input or logic controller input.
TE Connectivity 0.250 PCB Tab (AMP Faston spade), Mouser P/N: 571-624091
Molex KK Housing, 2 postiion with Ramp/Ribs, Mouser P/N: 538-22-01-3027
Molex KK crimp connectors 22-30 AWG socket, Mouser P/N: 538-0850-0032
TE Connectivity 0.250 PCB Tab (AMP Faston spade), Mouser P/N: 571-624091
Molex KK Housing, 2 postiion with Ramp/Ribs, Mouser P/N: 538-22-01-3027
Molex KK crimp connectors 22-30 AWG socket, Mouser P/N: 538-0850-0032
I got my boards today.
Once again, customs took their time ...
The boards were shipped on February 8th
I will try them out tomorrow
Many Thanks
Once again, customs took their time ...
The boards were shipped on February 8th
I will try them out tomorrow
Many Thanks
I received a question today asking if one bonus board can control both gen2 SSRs? Yes, connect the logic control in series. That is, the cathode out of the bonus board goes to anode of SSR 1 (X1) and cathode of SSR1 goes to anode of SSR 2 (X1) and cathode of SSR2 goes to the anode of bonus board.
