what do you think is the suitable driver for this amp on this site???
Crown - The Professional Choice
any suggestions?
I suggest to use this speakers projects.
Attachments
God gracious Apex, this is a great success. I made it and it works fine. Thanks you very much for the schematics and the PCB layout. Even tough I modified it a bit but it still retain the same artwork as yours. Thanks again. Below are the images:
I am using ExpressPCB for the PCB layout and the schematic. You can download it for free from this website: ExpressPCB - Free PCB layout and schematic software
I am using ExpressPCB for the PCB layout and the schematic. You can download it for free from this website: ExpressPCB - Free PCB layout and schematic software
Attachments
Hiii...sir, i have some transistor pnp A1943, what can to modification to pnp follower??? thank you...
God gracious Apex, this is a great success. I made it and it works fine. Thanks you very much for the schematics and the PCB layout. Even tough I modified it a bit but it still retain the same artwork as yours. Thanks again. Below are the images:
I am using ExpressPCB for the PCB layout and the schematic. You can download it for free from this website: ExpressPCB - Free PCB layout and schematic software
Nice work, 2N3773 on pictures are fake motorola!
Regards
schematic for the preamp
Who care about fake! as as your design work! We got billions of them here in the market! Would you mind show me the schematic for the preamp please?
Best regard
Albert B.
Nice work, 2N3773 on pictures are fake motorola!
Regards
Who care about fake! as as your design work! We got billions of them here in the market! Would you mind show me the schematic for the preamp please?
Best regard
Albert B.
more than 3MB for six pics.Below are the images:
When is the Forum going to stop this lunacy?
"Who care about fake! "
Fake parts are seldom as robust as original parts, I suggest you add a DC protect circuit.
Fake parts are seldom as robust as original parts, I suggest you add a DC protect circuit.
plase care to share your scema quasi pnp output.
thanks🙂🙂
See post #240,
Regards
what is the full power into mono 8ohms, 4ohms and bridge 8ohms, 4 ohms?
See post #59
Regards
See post #59
Regards
oh i see, that is for +-65... how about with +-78v dc with 5 pairs of c5200?...
thanks
regards
The verdict
It is hard to find original parts in this regions. If you do, it will cost you lot (may be around RM120.00/US38.00). It's alright to use fake one at this initial stage. After all it is an experimental project. When I found that this project work then I'll go for the originall one. Even tough you said it was fake, but it was from Mexico. You suggest to add DC protection circuit, can you show me how or just simply post the schematic.
Thanks, best regard.
Echobase
"Who care about fake! "
Fake parts are seldom as robust as original parts, I suggest you add a DC protect circuit.
It is hard to find original parts in this regions. If you do, it will cost you lot (may be around RM120.00/US38.00). It's alright to use fake one at this initial stage. After all it is an experimental project. When I found that this project work then I'll go for the originall one. Even tough you said it was fake, but it was from Mexico. You suggest to add DC protection circuit, can you show me how or just simply post the schematic.
Thanks, best regard.
Echobase
Use this simple DC protect with triac.
the coil, # 0f wire and how many turns?
the coil, # 0f wire and how many turns?
15 turns on 0f 10mm with 1,2mm wire.
preamp and speaker protection circuit
🙂
Thanks again for the tips. once again I am asking for the preamp and speaker protection circuit. I hope that I am not asking too much from you.
Best regard
Albert
P.S Are you Star Wars fan!
🙂
Use this simple DC protect with triac.
Thanks again for the tips. once again I am asking for the preamp and speaker protection circuit. I hope that I am not asking too much from you.
Best regard
Albert
P.S Are you Star Wars fan!
🙂
Thanks again for the tips. once again I am asking for the preamp and speaker protection circuit. I hope that I am not asking too much from you.
Best regard
Albert
P.S Are you Star Wars fan!
See my other threads...
- Home
- Amplifiers
- Solid State
- QUASI Amplifier for Beginners