My new amp. It's a NXV500 r2 from Aussie-amplifiers. I'm extremely happy with this amp despite some small problems building it. I wrote something about it here: http://www.diyaudio.com/forums/aussie-amplifiers/247552-building-nxv-500-r2.html
Attachments
Teti: looks very impressive. Please re-state what's in the box.
Thanks this is full nude video
DIY 200W class A/B Power amplifier monoblocks - working progress and review of Hypa 17 - YouTube
Highend DIY 200W class A/B Solid state Power amplifier monoblocks build progress and review - triggers in master/slave mode, enclosures from silicon ray and little review, comparison with McIntosh Mc275. Amplifier modules Hypa 17, soft start, DC filter
Last edited:
ha ha well known ...
Dad, I have also ultralinear 1000W, if you were interested.
Last edited:
It looks like you are using Kapton tape as your isolator. How do you make the screw holes? I've tried a few methods without satisfactory results.
I use one of these http://i01.i.aliimg.com/wsphoto/v0/...h-Punching-Plier-Hole-punch-pliers-20pcs-.jpg
with a thick piece of paper down under the kapton
Dad, I have also ultralinear 1000W, if you were interested.
Are those kits? Do you have the schematics?
Try to use a thin tube with a sharpened edgeIt looks like you are using Kapton tape as your isolator. How do you make the screw holes? I've tried a few methods without satisfactory results.
- Home
- Amplifiers
- Solid State
- Post your Solid State pics here