PeeCeeBee

[Lazy Cat]

Both statements are valid from subjective point of view. We all hear differently... 🙁

I think you have no rights to patronize other people and their opinions, especially after shamelessly copying my work. Humble is the word.

 

[wintermute]

LC you know as well as anyone the history of this thread and it's intent. http://www.diyaudio.com/forums/search.php?do=finduser&userid=70528&searchthreadid=231662

The above is way out of line. Next time will not just be a warning.

 

[Lazy Cat]

Thanks. Warning accepted. 🙂

 

[shaan]

I've built the V3 with all panasonic cap. But no audible difference at all

The audition was held in my home with thekingstallion on board. It was a funny and revealing experience comparing the four brands of caps. We used Keltron and Nippon caps in one amp, Keltron and Elna caps in second and all Panasonic caps in the third. The listening went for four hours. No strong emotions 😀 and it made us feel the extra bucks were wasted. But at least we realized that we are deaf.

One thing was clear, even without any film caps in the PS or feedback path hf reaponse was extraordinary and the overall session in no way caused fatigue. Everytime a new track was being played, new ones kept being added.

😉

 

[danielrev]

hi there some progres on enclosure for peeceebee .
nothing special here ,made from scraped wood from back yard .
just need to make hole for iec socket and switch .

 

[shaan]

Hi daniel!

Rocking retro-look is rocking! 😉

Something similar is growing here at the carpenter's for a pair of v2. Will show off the grains and curves once in full swing! 😀

 

[jkuetemann]

I have always liked the look of wood when used in an enclosure's construction but have never tried it myself. I just might have to change that someday.

Looks good danielrev.

 

[danielrev]

hi thanks shaan and jason .
this is my first attempt too building an enclosure .
thats wood actually low grade ,so not look shinny at all .
i like wood look too jason ,thats my main reason to choose wooden enclosure .
i will post the final product but maybe take little bit time since im busy on work .

 

[shaan]

A wood+aluminium cabinet is about to be populated with peeceebee. First time working with toroids. 😉

 

[yassud]

That is very nice, some adequate ventilation for air circulation also prepare my friend.

 

[shaan]

That is very nice, some adequate ventilation for air circulation also prepare my friend.

Yes I plan to make 30x5mm holes in bottom plate, under and around the heatsink fins. Top plate already has them.

 

[xrk971]

First time working with toroids

What did you use before if not toroidal transformers?

 

[shaan]

E-I, of course.

 

[Cartroot]

i build this,
thanks shaan..

 

[shaan]

Very nice!

I am literally drooling over those silver mica caps. You are a lucky man!

Thanks for sharing your build.

 

[yassud]

why so many of his jumper wire ?

 

[jkuetemann]

Not jumpers, the MOSFET leads were just bent over instead of being trimmed off.

 

[shaan]

Hello Cartroot.

What brand and model are the 2200uF capacitors?

 

[yassud]

Ohh...I am sorry friend

 

[Cartroot]

2200uF Panasonic FC series.