Hello Chris,
no hurry for the payments, when I will need them be sure I'll ask !😀
I can take Paypal (plus fees since I have no margin), or bank transfer.
Cheers
Andrea
no hurry for the payments, when I will need them be sure I'll ask !😀
I can take Paypal (plus fees since I have no margin), or bank transfer.
Cheers
Andrea
Last call....
Ladies and gentlemen, there are only few hours before this GB closes.
So please decide yourselves!
Cheers
Andrea
Ladies and gentlemen, there are only few hours before this GB closes.
So please decide yourselves!
Cheers
Andrea
Hello Andrea,
I've added one TDA1541A trafo to the wiki for delivery in the Netherlands.
I've send you a mail for details on the transfer.
Best regards, Arjen.
I've added one TDA1541A trafo to the wiki for delivery in the Netherlands.
I've send you a mail for details on the transfer.
Best regards, Arjen.
Jean-Paul, did my private email to confirm that we can share shipping cost reach you?
Andrea, did you receive my mail on the details?
Best regards, Arjen.
vrhff04 _at_ xs4all.nl
(replace _at_ by @)
Andrea, did you receive my mail on the details?
Best regards, Arjen.
vrhff04 _at_ xs4all.nl
(replace _at_ by @)
Order info
Hi all,
I sent the order out for 11 pcs (if JP is in I can ask to add another), specifying the position of secondaries as per Pedja's board, leaving the HV+filament secondaries near the I/V section.
Leadtime is 10 to 20 working days.
Will let know further info.
Cheers
Andrea
Hi all,
I sent the order out for 11 pcs (if JP is in I can ask to add another), specifying the position of secondaries as per Pedja's board, leaving the HV+filament secondaries near the I/V section.
Leadtime is 10 to 20 working days.
Will let know further info.
Cheers
Andrea
Just wonderful Andrea. Thank you.
Please let me know the proportional cost of taking receipt of 2 of them, one for me and one for dhaen, and sending them to a UK address I shall send to you in an email.
How exciting !
Please let me know the proportional cost of taking receipt of 2 of them, one for me and one for dhaen, and sending them to a UK address I shall send to you in an email.
How exciting !
Hi,
on this webpage http://www.poste.it/postali/pacchi_estero/quick.shtml
you can find the prices of quick pack Europe.
2 pcs should be less than 5 Kg so the raw shipping cost to UK is 28,8€.
Cheers
Andrea
on this webpage http://www.poste.it/postali/pacchi_estero/quick.shtml
you can find the prices of quick pack Europe.
2 pcs should be less than 5 Kg so the raw shipping cost to UK is 28,8€.
Cheers
Andrea
But presumably you have to pay to get the transformers shipped to you. Dividing that shipping cost by the number of transformers, adding the cost of 1 transformer, then doubling the result for 2, and then adding the 28,8€, will come to the total cost I need to reimburse you.
And did you say there's an extra charge for paying you through PayPal?
And did you say there's an extra charge for paying you through PayPal?
Hi,
your calculations are correct (Paypal charges me 3,9% + 0.35€ per transaction btw), but I thought you needed a rough calculation.
When money will be needed I intended to be more precise 😉
Cheers
Andrea
your calculations are correct (Paypal charges me 3,9% + 0.35€ per transaction btw), but I thought you needed a rough calculation.
When money will be needed I intended to be more precise 😉
Cheers
Andrea
Sorry, I am in ! One for me please. AV trouvaille ( Arjen ) and I will share shipping costs. One of us will let you know where to send the transformers, Andy.
Thanks for the effort you are putting into this !
Thanks for the effort you are putting into this !
More news
Hi,
I've been contacted by Tector's technical staff.
Unfortunately there is a problem about the position of the windings, that in a encapsulated trafo must come out from a common hole in the shell. The large number of windings moreover makes almost impossible to wind them in order to have a specifical order of the output wires, but sinche they will come out say in a 90° space or less I think this becomes secondary.
Of course the label will report the color code of the windings.
I confirmed the order.
Cheers
Andrea
Hi,
I've been contacted by Tector's technical staff.
Unfortunately there is a problem about the position of the windings, that in a encapsulated trafo must come out from a common hole in the shell. The large number of windings moreover makes almost impossible to wind them in order to have a specifical order of the output wires, but sinche they will come out say in a 90° space or less I think this becomes secondary.
Of course the label will report the color code of the windings.
I confirmed the order.
Cheers
Andrea
Hi All,
I just saw the message above this morning. It IS possible to have separate exits and the secondaries in the order you want. Antrim did this for us. The bottom of the shell was notched to take the secondary wire. If I were doing this again, I'd ask for the shells to be sent to me, I'd drill the holes (dor neatness) and return the shells for potting. THey could be doing the winding while I had the shells. Or you could pot the trafos yourself, I suppose - All of this is probably a pain, but you'd get the finish you want.
I hope this helps - not wishing to muddy the waters, but I think your requirements lie in the "difficult to achieve" pile rather than the "not possible". I'd have another word with them.............
Cheers
Jon 🙂
I just saw the message above this morning. It IS possible to have separate exits and the secondaries in the order you want. Antrim did this for us. The bottom of the shell was notched to take the secondary wire. If I were doing this again, I'd ask for the shells to be sent to me, I'd drill the holes (dor neatness) and return the shells for potting. THey could be doing the winding while I had the shells. Or you could pot the trafos yourself, I suppose - All of this is probably a pain, but you'd get the finish you want.
I hope this helps - not wishing to muddy the waters, but I think your requirements lie in the "difficult to achieve" pile rather than the "not possible". I'd have another word with them.............
Cheers
Jon 🙂
Hello Andrea,
I bet everyone was wondering who would not be able any longer to resist the stupid question "any news yet?"
I bet everyone was wondering who would not be able any longer to resist the stupid question "any news yet?"
They replied to my email and said that the trafos will be ready in 2-3 days.
I should have them next week.
Cheers
Andrea
I should have them next week.
Cheers
Andrea
- Home
- Group Buys
- Pedja Rogic 1541A DAC Custom-Wound Transformer European Union Group Purchase