please let me know if you have not received PCB phono ASH
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio……..
PM: rollypolly. i seen it!
Thank
quanghao
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio……..
PM: rollypolly. i seen it!
Thank
quanghao
please let me know if you have not received PCB phono ASH
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio……..
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio……..
please let me know if you have not received PCB phono ASH
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio
6. Torsken
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio
6. Torsken
Hi!
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio
6. Torsken
you cac check all again and please sen me again your address??
Thank !
I have plane Sent you the other PCB!
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. klaju1955
5. alex1946audio
6. Torsken
you cac check all again and please sen me again your address??
Thank !
I have plane Sent you the other PCB!
please let me know if you have not received PCB phono ASH
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
10. klaju1955
..........
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. alex1946audio
5. Torsken
......
A. Phono D3A PCBs arrived :
1. pred
2. johngalt47
3. guglielmope
4. Loboone
5.johngalt47
6.tangmonster
7. Pilsern
8. jormajj
9.khaho
10. klaju1955
..........
Phono D3A PCBs not arrived :
1. johngalt47
2. 2. vanofmonks
3. John Caswell
4. alex1946audio
5. Torsken
......
If you ordered a set , and received a set , please take your name from the not arrived list.
quanghao does not understand what you are saying.
He does not understand what I am saying.
I Have no idea what ASH means ,but I do know that it is just text on the silkscreen. 🙂
quanghao does not understand what you are saying.
He does not understand what I am saying.
I Have no idea what ASH means ,but I do know that it is just text on the silkscreen. 🙂
Hi all
i am currently busy ordering components. I have found these two fonfusing things on the pcb that I will post to possibly help someone else who is building this phono premamp.
on the pcb for power supply there are 3 x R13 reference designators they have values of
100R and 6.8k
if you compare the pcb to the schematic.
The 2x R13 100R on the pcb is R15 and R16 100r 2W on the schematic
R14 200R on the pcb is 220R 1/4W R13 on the schematic
ON the pcb R13 6.8K is R14 6.8k 1/2W on the schematic
In short ,the values on the pcb is correct but it does not correlate back to the powersupply schematic.
i am currently busy ordering components. I have found these two fonfusing things on the pcb that I will post to possibly help someone else who is building this phono premamp.
on the pcb for power supply there are 3 x R13 reference designators they have values of
100R and 6.8k
if you compare the pcb to the schematic.
The 2x R13 100R on the pcb is R15 and R16 100r 2W on the schematic
R14 200R on the pcb is 220R 1/4W R13 on the schematic
ON the pcb R13 6.8K is R14 6.8k 1/2W on the schematic
In short ,the values on the pcb is correct but it does not correlate back to the powersupply schematic.
Hi!
R14, 15 connect +- filament to GND. The value 100R/2w or no neeed it, So you connect - filament to GND.
one PCB R 13 = 6.8K, it is ok!
Attention on the pcb there is a printing error:
At in - put:
Island between GND and place In.
R14, 15 connect +- filament to GND. The value 100R/2w or no neeed it, So you connect - filament to GND.
one PCB R 13 = 6.8K, it is ok!
Attention on the pcb there is a printing error:
At in - put:
Island between GND and place In.
