The shark has to move forward.
😎
Gesendet von iPhone mit Tapatalk
DRC/ERC done.
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
We have to agree about colours for silkscreen and soldermask.
Here the pair prices, all boards ENIG, 2x35µm, E-tested (without shipping):
- green/white --> 15€
- blue/white or black/white --> 17€
- red/black or white/black --> 19€
Jean-Paul
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
We have to agree about colours for silkscreen and soldermask.
Here the pair prices, all boards ENIG, 2x35µm, E-tested (without shipping):
- green/white --> 15€
- blue/white or black/white --> 17€
- red/black or white/black --> 19€
Jean-Paul
Attachments
-
M2-V1-SCH.pdf44.1 KB · Views: 259
-
M2-V1-PBA-TOP.pdf77.5 KB · Views: 265
-
M2-V1-Render-Green_White.jpg105.8 KB · Views: 1,251
-
M2-V1-Render-Blue_White.jpg107.2 KB · Views: 1,244
-
M2-V1-Render-Red_Black.png910 KB · Views: 1,242
-
M2-V1-Render-Black_White.png968.4 KB · Views: 1,182
-
M2-V1-Render-White_Blxk.png968.5 KB · Views: 1,062
DRC/ERC done.
Someone to check pinning (spacing) of the transformer (I found TRIAD equivalent with different spacing for pin 1 and 2)?!
Not sure this is what you meant: I don't have eagle so I took the measurements off a 1:1 print-out. There, the pin spacings (within my accuracy) match the drawing on the Edcor web-site. Also the outer dimensions of the transformer and the TEKO housing seem OK.
... all boards ENIG ...
While ENIG looks nice and is easier to solder, I would prefer HASL. It's cheaper, and does not have the risk of "Gold Embrittlement of Solder Joints".
Gold Embrittlement of Solder Joints
While HASL faces other cons.
I'm using ENIG since 5 years for military airbone developments without problems. Ok mainly SMD PBA's. This technologie is qualified in my company.
Jean-Paul
I'm using ENIG since 5 years for military airbone developments without problems. Ok mainly SMD PBA's. This technologie is qualified in my company.
Jean-Paul
It's always wise to purchase a single pcb for testing before buying a large quantity.
Things can easily be overlooked that sometimes only become obvious once building begins.
Things can easily be overlooked that sometimes only become obvious once building begins.
Right! One pair still ordered!
I need someone to build, delivery transformer not before 3 weeks.
Jean-Paul
I need someone to build, delivery transformer not before 3 weeks.
Jean-Paul
Is Vishay the only game in town for the MOSFETs? That's all I'm finding unless somebody can point me in another direction.
If and when it all comes to pass, I have Fairchild fets. At least enough for a certain number of sets.
- Home
- Amplifiers
- Pass Labs
- Official M2 schematic