I already ordered 2.5.2 ... just a suggestion for Audiophile market. A "Ferrari red" or "black" coloured board could be definitely better than the classic green .... ;-)
For now we have ~ 20 pieces 2.5.2 + 2.6.2 (under quality control by Pavel). I'll start to send PM approximately at 10/05.
Next 10 pieces 2.5.2 + 2.6.2 will be ready early next week and after quality control (2-3 days) will be shipped.
The rest of orders will be ready for shipment in a 2-3 weeks.
Next 10 pieces 2.5.2 + 2.6.2 will be ready early next week and after quality control (2-3 days) will be shipped.
The rest of orders will be ready for shipment in a 2-3 weeks.
Today I start to send PM. I will do it every 3-4 days for 5 boards per day.
Pls check Order List and your personal box.
Pls check Order List and your personal box.
Hi Vit & Pavel.
I'm working on the metalwork for my DSC2 chassis. Can you tell me the X,Y coordinates of pin1 of the DSC2 header, circled in pink on the image below;
I need to know as my isolator board for the Cronus reclocker will be in front of the board.
Many thanks.
Ray
I'm working on the metalwork for my DSC2 chassis. Can you tell me the X,Y coordinates of pin1 of the DSC2 header, circled in pink on the image below;
I need to know as my isolator board for the Cronus reclocker will be in front of the board.
Many thanks.
Ray
Looks like a good price for some used Lundahl LL1684 transformers if anyone wants to try them in a DSC2 V2.5.2?
http://www.diyaudio.com/forums/swap...-vishay-s102c-foil-resistors.html#post5420786
http://www.diyaudio.com/forums/swap...-vishay-s102c-foil-resistors.html#post5420786
Some shipment info:
I'll ship all paid orders tomorrow (the rest of first batch).
At the weekend I'll get the next batch from Pavel (10-13 boards of DSC2.5.2+2.6.2).
I'll ship all paid orders tomorrow (the rest of first batch).
At the weekend I'll get the next batch from Pavel (10-13 boards of DSC2.5.2+2.6.2).
Yes, you can. But if the board does not have a MUTE line, you will hear loud click/pop at the beginning of the track.
There is XMOS with MUTE. Pavel reports that it works stable at DSD512 w/o click/pop.
You must manually wire MUTE pin (see picture).
I also attache some Pavel's measurements of this board.
Attachments
Last edited:
Thanks. I understand now. BTW, I have 2 spare transformers, but they both rated 600:600. Can I use them on DSC 2?
Poting
Poting
The sound quality of DSC2 depends heavily on the transformers. You can use your transformers, but the result is difficult to predict.
hmmm...
It is curious to see different performance in the analog domain related to an XMOS interface. As there are plenty of DACs which perform (measured) at a very high level (noise floors at -140 dB, no harmonics above -130 dB), it would appear that the XMOS interface Pavel used for these measurements was not optimized.
In any case, it is interesting. Latest news from Dom is that there will soon be Amanero firmware version 2004 "soon", which will (hopefully) once and for all address the Amanero difficulties with Linux and high rates of (native) DSD...
I hope so, it has been a long time coming.
It is curious to see different performance in the analog domain related to an XMOS interface. As there are plenty of DACs which perform (measured) at a very high level (noise floors at -140 dB, no harmonics above -130 dB), it would appear that the XMOS interface Pavel used for these measurements was not optimized.
In any case, it is interesting. Latest news from Dom is that there will soon be Amanero firmware version 2004 "soon", which will (hopefully) once and for all address the Amanero difficulties with Linux and high rates of (native) DSD...
I hope so, it has been a long time coming.
Hi guys , can I modify my order for the 2.6 to rca and xlr not soldered.
Thank you ,
Gordon
PS , how do I pay you?
Thank you ,
Gordon
PS , how do I pay you?
Hi, Gordon!
By default XLR/RCA, transformers are unsoldered. If you want special configuration - send PM to me.
I've added your wishes in Order List.
Payment is required only after your board are ready. I'll send PM in advance and ship order in a 2-3 working day after payment. Payment should be done to Pavel Pogodin's paypal account.