Very good intention! so everyone will be able to start experiments by themselves but even beginners could build the Paradise by guidance of the chief engineer!
Hurrayh!
Michael
Hurrayh!
Michael
It could start with this transformer. Simply rectified it has too much voltage. We can drop the voltage in resistors or we can use coils. One transformer is enough for both channels but 2 can be used for double mono.Transformateur R-CORE à fixation sur châssis 30VA - 2 x 24V - Transformateurs R-CORE pour châssis
This rectifier diode is hopelessly over dimensioned but hyperfast and soft recovery.
Other like Fairchild make similar products.http://www.hifituning24.de//downloads/hfa08tb60.pdf
Other like Fairchild make similar products.http://www.hifituning24.de//downloads/hfa08tb60.pdf
Damn, the 4 poles are expensive, the two poles are ok but there are more affordable alternatives.http://www.mundorf.com/deutsch 1.1/kondensatoren2.htm
These might be very nice on a Power Amp and surely work great on the phono as well.
Why not. My vote goes for CLC with Hammond chokes or, maybe even more economic, with gyrators as choke replacement (good reading - sry, german only: Spannungsregelung mit elektronischer Brummsiebung (komplementär-darlington, LM350, MJE2955, MJE3055)).
Good alternative ? Seems to me they have quite same specs.
http://www.fairchildsemi.com/ds/RU/RURP860.pdf
Last edited:
Thats what i said, others make similar products. With cost in mind the duty is now to find the most economic ones that have this level of performance. Silizium Carbite is the best but very expensive.
F&T are fine electrolytics also in my experience. I wouldn't be surprised if they OEM some of the best boutique ones out there.
http://www.ftcap.de/index.php/screw-terminals-read-more/items/serie-gw-40c-105c-5000-h-92.html
Who stocks them retail in Germany?
Here is an F&T that has the parameters i think are suitable.https://www.distrelec.de/alu-elko-radial-10-mf-40-vdc/f&t/lfb10304035050/802705I am thinking about 2 x 10mF,
coils ( 100mH or more ? ) and then again 2 x 10mF. That would be the values of the Opaus Magnum. Regulation on board of the Paradise is good, my desire is more to remove HF/RF. Even the best pre regulator can not remove zero hum.
coils ( 100mH or more ? ) and then again 2 x 10mF. That would be the values of the Opaus Magnum. Regulation on board of the Paradise is good, my desire is more to remove HF/RF. Even the best pre regulator can not remove zero hum.
Sorry, the link was broken :https://www.distrelec.de/alu-elko-radial-10-mf-40-vdc/f&t/lfb10304035050/802705
They cost ca. 7,-€ and the non 4 pole Mundorf around 11,-€.
They cost ca. 7,-€ and the non 4 pole Mundorf around 11,-€.