lol, living next to all those giant Lizards and Monkeys is what makes you this way ;-)
Hi,
Btw, I just uploaded a new ZIP and corrected the md5 hash. Please re-download!
rel-stretch.zip
f1f94898ee060df253d19bf0d3705d38
A way to avoid the Linux partition surgery in the first couple steps is to plug the USB stick into a Windows or Mac which should show the FAT32 boot partition. Create a file named ssh in this partition.
Remember, Stretch Lite does not ship with ssh enabled!
-Tim
Btw, I just uploaded a new ZIP and corrected the md5 hash. Please re-download!
rel-stretch.zip
f1f94898ee060df253d19bf0d3705d38
A way to avoid the Linux partition surgery in the first couple steps is to plug the USB stick into a Windows or Mac which should show the FAT32 boot partition. Create a file named ssh in this partition.
Remember, Stretch Lite does not ship with ssh enabled!
-Tim
Hi Tim
Surely there must be someway of automating this install ?
I'm thinking of something like the Raspotify addon I did recently - a few simple commands and it seemed to install itself
I think the command was
curl -sL https://dtcooper.github.io/raspotify/install.sh | sh
I'm a bit of a noob so please forgive me if this is a ludicrous suggestion
Lx
Surely there must be someway of automating this install ?
I'm thinking of something like the Raspotify addon I did recently - a few simple commands and it seemed to install itself
I think the command was
curl -sL https://dtcooper.github.io/raspotify/install.sh | sh
I'm a bit of a noob so please forgive me if this is a ludicrous suggestion
Lx
One other item is that Stretch Lite also ships with the new hashed network interface names and not good old eth0 and wlan0.
The cmd below from STEP 2 adds a setting that reverts to the familiar names. Or manually edit /boot/cmdline.txt
sudo sed -i "s/^/net.ifnames=0 /" /mnt/tmp1/cmdline.txt
-Tim
Hi Tim,
I somehow not getting any sounds on beta6 although the interface looks fine. The duration counter is increasing & etc but just no sound.
I use an USB LG HiFi+ which was detected as HM for runeaudio or volumio. I choose USB Audio device as there is no "HM" in the drop down menu.
What else I can do?
I somehow not getting any sounds on beta6 although the interface looks fine. The duration counter is increasing & etc but just no sound.
I use an USB LG HiFi+ which was detected as HM for runeaudio or volumio. I choose USB Audio device as there is no "HM" in the drop down menu.
What else I can do?
Hi @bigbear2003,
A good start to troubleshooting would be to look at /var/log/moode.log.
Please post it.
-Tim
A good start to troubleshooting would be to look at /var/log/moode.log.
Please post it.
-Tim
pi@moode:~ $ nano /var/log/moode.log
GNU nano 2.7.4 File: /var/log/moode.log Modified
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
GNU nano 2.7.4 File: /var/log/moode.log Modified
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
What is another way to copy&paste the log other than using nano? It seems this is the whole thing.
S Y S T E M P A R A M E T E R S
Date and time = 2017-11-02 11:33:47
System uptime = up 8 minutes
Timezone = America/Detroit
moOde = Release 4.0, 2017-MM-DD
moodeOS = Version deprecated multi-kernel
Host name = moode
ETH0 IP = 192.168.1.246
ETH0 MAC = b8:27:eb:a1:a6:dd
WLAN0 IP = 192.168.1.254
WLAN0 MAC = b8:27:eb:f4:f3:88
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
KERNEL = 4.9.59-v7+
KTIMER FREQ = 100 Hz
USB BOOT = not enabled
Warranty = OK
ROOT size = 29G
ROOT used = 6%
ROOT avail = 26G
FS expand = expanded
MEM free = 612 MB
MEM used = 59 MB
Temperature = 43.5°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = On
P3-BT = On
HDMI = on
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = On
SSH server = Off
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.19
NGINX = 1.10.3
SQLite = 3.16.2
Bluetooth = 5.43
C P U L O A D
CPU %usr %sys %idle
all 0.13 0.00 99.87
0 0.50 0.00 99.50
1 0.00 0.00 100.00
2 0.00 0.00 100.00
3 0.00 0.00 100.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
19 - sysinfo.sh 0.2 0 1.3
19 - systemd 0.6 1 0.5
29 - mpd 2.9 1 0.4
19 - sudo 0.3 1 0.3
19 - worker.php 1.1 2 0.2
19 - cifsd 0.0 0 0.2
19 - systemd-journal 0.4 3 0.1
19 - systemd-udevd 0.3 0 0.1
19 - kthreadd 0.0 1 0.0
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 249 MHz
h264 = 300 MHz pixel = 148 MHz
isp = 300 MHz vec = 0 MHz
v3d = 300 MHz hdmi = 163 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.2688V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
/var/www/command/sysinfo.sh: line 57: squeezelite-armv7l: command not found
/var/www/command/sysinfo.sh: line 58: squeezelite-armv7l: command not found
/var/www/command/sysinfo.sh: line 65: shairport-sync: command not found
U I C U S T O M I Z A T I O N S
Theme color = Emerald
Playback history = No
Extra metadata = Yes
Library = Use Artist
A U D I O P A R A M E T E R S
Audio device = USB audio device
Interface = On-board
Hdwr volume = 65
Mixer name = PCM
Output stream = S16_LE / 44100
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 51
Volume mute = Off
Volume limit = 80
Airplay receiver = Off
Bluetooth controller = Off
Squeezelite = Off
UPnP renderer = Off
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.10
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = no
DSD over PCM (DoP) = no
Replay gain = off
A I R P L A Y S E T T I N G S
Version =
Friendly name = Moode Airplay
Metadata display = Off
ALSA device = hw:0
Volume mixer = auto
Resume MPD after = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S Q U E E Z E L I T E S E T T I N G S
Version = "DSD/SRC disabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E
M O O D E L O G
20171102 112517 worker: - Start
20171102 112517 worker: Successfully daemonized
20171102 112517 worker: - Init
20171102 112517 worker: Session loaded
20171102 112517 worker: Debug logging (off)
20171102 112519 worker: Host (moode)
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
Close
From the GUI itself
Date and time = 2017-11-02 11:33:47
System uptime = up 8 minutes
Timezone = America/Detroit
moOde = Release 4.0, 2017-MM-DD
moodeOS = Version deprecated multi-kernel
Host name = moode
ETH0 IP = 192.168.1.246
ETH0 MAC = b8:27:eb:a1:a6:dd
WLAN0 IP = 192.168.1.254
WLAN0 MAC = b8:27:eb:f4:f3:88
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
KERNEL = 4.9.59-v7+
KTIMER FREQ = 100 Hz
USB BOOT = not enabled
Warranty = OK
ROOT size = 29G
ROOT used = 6%
ROOT avail = 26G
FS expand = expanded
MEM free = 612 MB
MEM used = 59 MB
Temperature = 43.5°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = On
P3-BT = On
HDMI = on
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = On
SSH server = Off
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.19
NGINX = 1.10.3
SQLite = 3.16.2
Bluetooth = 5.43
C P U L O A D
CPU %usr %sys %idle
all 0.13 0.00 99.87
0 0.50 0.00 99.50
1 0.00 0.00 100.00
2 0.00 0.00 100.00
3 0.00 0.00 100.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
19 - sysinfo.sh 0.2 0 1.3
19 - systemd 0.6 1 0.5
29 - mpd 2.9 1 0.4
19 - sudo 0.3 1 0.3
19 - worker.php 1.1 2 0.2
19 - cifsd 0.0 0 0.2
19 - systemd-journal 0.4 3 0.1
19 - systemd-udevd 0.3 0 0.1
19 - kthreadd 0.0 1 0.0
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 249 MHz
h264 = 300 MHz pixel = 148 MHz
isp = 300 MHz vec = 0 MHz
v3d = 300 MHz hdmi = 163 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.2688V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
/var/www/command/sysinfo.sh: line 57: squeezelite-armv7l: command not found
/var/www/command/sysinfo.sh: line 58: squeezelite-armv7l: command not found
/var/www/command/sysinfo.sh: line 65: shairport-sync: command not found
U I C U S T O M I Z A T I O N S
Theme color = Emerald
Playback history = No
Extra metadata = Yes
Library = Use Artist
A U D I O P A R A M E T E R S
Audio device = USB audio device
Interface = On-board
Hdwr volume = 65
Mixer name = PCM
Output stream = S16_LE / 44100
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 51
Volume mute = Off
Volume limit = 80
Airplay receiver = Off
Bluetooth controller = Off
Squeezelite = Off
UPnP renderer = Off
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.10
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = no
DSD over PCM (DoP) = no
Replay gain = off
A I R P L A Y S E T T I N G S
Version =
Friendly name = Moode Airplay
Metadata display = Off
ALSA device = hw:0
Volume mixer = auto
Resume MPD after = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S Q U E E Z E L I T E S E T T I N G S
Version = "DSD/SRC disabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E
M O O D E L O G
20171102 112517 worker: - Start
20171102 112517 worker: Successfully daemonized
20171102 112517 worker: - Init
20171102 112517 worker: Session loaded
20171102 112517 worker: Debug logging (off)
20171102 112519 worker: Host (moode)
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
Close
From the GUI itself
pi@moode:~ $ cat /var/log/moode.log
20171102 112517 worker: - Start
20171102 112517 worker: Successfully daemonized
20171102 112517 worker: - Init
20171102 112517 worker: Session loaded
20171102 112517 worker: Debug logging (off)
20171102 112519 worker: Host (moode)
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
20171102 112517 worker: - Start
20171102 112517 worker: Successfully daemonized
20171102 112517 worker: - Init
20171102 112517 worker: Session loaded
20171102 112517 worker: Debug logging (off)
20171102 112519 worker: Host (moode)
20171102 112519 worker: Hdwr (Pi-3B 1GB v1.2)
20171102 112519 worker: Arch (armv7l)
20171102 112519 worker: Kver (4.9.59-v7+)
20171102 112519 worker: Ktyp (Standard)
20171102 112519 worker: Gov (performance)
20171102 112519 worker: OS (moodeOS deprecated)
20171102 112519 worker: Rel (Moode 4.0 2017-MM-DD)
20171102 112519 worker: Upd (None)
20171102 112519 worker: MPD (0.20.10)
20171102 112519 worker: USB boot not enabled yet
20171102 112519 worker: File system expanded
20171102 112519 worker: HDMI port on
20171102 112520 worker: File check ok
20171102 112520 worker: - Network
20171102 112520 worker: eth0 exists
20171102 112520 worker: eth0 (192.168.1.246)
20171102 112520 worker: wlan0 exists
20171102 112520 worker: wlan0 trying SSID (cheungtsw)
20171102 112520 worker: wlan0 (192.168.1.254)
20171102 112520 worker: - Audio
20171102 112520 worker: ALSA outputs unmuted
20171102 112520 worker: Audio output (On-board audio device)
20171102 112520 worker: ALSA mixer name (PCM)
20171102 112520 worker: MPD volume control (software)
20171102 112520 worker: Hdwr volume controller exists
20171102 112520 worker: - Services
20171102 112522 worker: MPD started
20171102 112522 worker: MPD scheduler policy (time-share)
20171102 112522 worker: MPD output 1 ALSA default (on)
20171102 112522 worker: MPD output 2 ALSA crossfeed (off)
20171102 112522 worker: MPD output 3 ALSA parametric eq (off)
20171102 112522 worker: MPD output 4 ALSA graphic eq (off)
20171102 112522 worker: MPD crossfade (off)
20171102 112522 worker: - Last
20171102 112522 worker: USB sources (none attached)
20171102 112523 worker: NAS sources (mountall initiated)
20171102 112523 worker: Volume level (51) restored
20171102 112523 worker: Watchdog started
20171102 112523 worker: Ready
Hi,
Thanks 🙂 The line below indicates On-board audio and not USB audio.
20171102 112520 worker: Audio output (On-board audio device)
Go into MPD SETTINGS, set Audio output to "USB audio device" and then APPLY.
-Tim
Hi Bigbear,
You have the honor of being the first to post a successful moOde 4 build 🙂)
-Tim
Hi Tim
Thank you for your great work. Will I be able to follow the build recipe using a Raspberrypi 3b with the latest version of Rasbian on?
Thank you for your great work. Will I be able to follow the build recipe using a Raspberrypi 3b with the latest version of Rasbian on?