Based on others comments previously it seems to depend on the stand/shelf material in combination with the feet material.
I've used both but never really noticed much difference except with an old plastic philips player using sorbothene feet and sitting on a very thick heavy wooden base (chopping board!).
With oak feet I got fed up with the player sliding back everytime I pressed a button.
Regards
Pete
Yeah, now that everything is working again and you have a stable player, you can start thinking about further tweaks that can be done. The CD67 is very tweak-friendly, and there's a lot of room on the board for larger capacitors.
A decent clock, improved analog filter, or go all the way and build a DOS 🙂
Regards,
Ray
re flea
ray,
Im looking@ your flea boards minus the crystal where do you get the tentlabs crystal from?,Also are they dual output as 16.934/8.46.for the servo or do i need a divide by circuit.
thx ray alan 🙂
ray,
Im looking@ your flea boards minus the crystal where do you get the tentlabs crystal from?,Also are they dual output as 16.934/8.46.for the servo or do i need a divide by circuit.
thx ray alan 🙂
Hi Alan,
The Tentlabs XO can be ordered... at Tentlabs
There are also dealers available worldwide, but they do not all sell the DIY products like the XO. In case you decide to order a Flea board, I can get one for you as well, I order there regularly.
The Flea board has two outputs, but they are both taken from the XO's output. So a divider is needed for the servo. Or a second Flea 🙂
Regards,
Ray
The Tentlabs XO can be ordered... at Tentlabs
There are also dealers available worldwide, but they do not all sell the DIY products like the XO. In case you decide to order a Flea board, I can get one for you as well, I order there regularly.
The Flea board has two outputs, but they are both taken from the XO's output. So a divider is needed for the servo. Or a second Flea 🙂
Regards,
Ray
You know what's better than The Flea, Alan?
Two Fleas!
I got my oscillators direct from the TentLabs web shop, but it did take a few weeks. Guido recommends ordering from one of his resellers if you want them in a hurry.
Adding these made a HUGE difference to my player.
Edit: Ah, Ray beat me to it!
Two Fleas!
I got my oscillators direct from the TentLabs web shop, but it did take a few weeks. Guido recommends ordering from one of his resellers if you want them in a hurry.
Adding these made a HUGE difference to my player.
Edit: Ah, Ray beat me to it!
clock
For another player Ian,Just fancy building one.aint buying far eastern stuff after my last one .
cheers alan🙂
For another player Ian,Just fancy building one.aint buying far eastern stuff after my last one .
cheers alan🙂
Lmao!! Awesome!! If you want, I'll share the simple /2 circuit I use. No big secret, just a flip flop.
far eastern clocks
cheers ian alan🙄
last one i brought cabbaged 3 players laser going like a machine gun,Need to sort them out 2 se s and a standard.unplug the multiplug for the laser and laser stops mm mystery all 3 the same.
cheers ian alan🙄
SPower - at last getting some well deserved press!!
Clock wise, I think I'll stick to either my own or ones that I trust!!!!
Not sure how many of you nip onto Brents site but I've just found this advanced review of his SPower HC thats in HiFi choice mag in January in his reviews section. You know I've got 8 or 9 of these and they are absolutely superb. Its about time he started to get some recognition.
Fidelity Audio : Reviews
Clock wise, I think I'll stick to either my own or ones that I trust!!!!
Not sure how many of you nip onto Brents site but I've just found this advanced review of his SPower HC thats in HiFi choice mag in January in his reviews section. You know I've got 8 or 9 of these and they are absolutely superb. Its about time he started to get some recognition.
Fidelity Audio : Reviews
Attachments
Bout time
Brents been a resident guru on here well deserved helped us all along the way,
cheers brentalan
Clock wise, I think I'll stick to either my own or ones that I trust!!!!
Not sure how many of you nip onto Brents site but I've just found this advanced review of his SPower HC thats in HiFi choice mag in January in his reviews section. You know I've got 8 or 9 of these and they are absolutely superb. Its about time he started to get some recognition.
Fidelity Audio : Reviews
Brents been a resident guru on here well deserved helped us all along the way,
cheers brent
alan
re 67
Won a 67 off of ebay 10 quid, have a play see whats on offer🙂
cheers alan.
ive got 20 players here im getting a bit of an anorak.
Won a 67 off of ebay 10 quid, have a play see whats on offer🙂
cheers alan.
ive got 20 players here im getting a bit of an anorak.
Last edited:
Thats cheap well done. I have been after a spare incase i break mine but thay have been going for £40 to £70
re 67
Never messed with a cd67 i,ll have go got a bit of a fault but hey ho only laser probs, Tenner who cares😀
cheers alan
Never messed with a cd67 i,ll have go got a bit of a fault but hey ho only laser probs, Tenner who cares😀
cheers alan
Hi All,
I was about to do Mauro Penasa's tweak by adding 330pf caps in filter section. Is this tweak applied only if we use opamps? Or can it be done even if go for discrete output?
Just to clarify before doing it. Thanks in advance.
Badri
I was about to do Mauro Penasa's tweak by adding 330pf caps in filter section. Is this tweak applied only if we use opamps? Or can it be done even if go for discrete output?
Just to clarify before doing it. Thanks in advance.
Badri
another successful CD63 mod
Have been away from this forum for some time busy in carrying out modding my CD63 MKII KI. Now the project has been completed with great success and here are a few photos showing the work that I have done.
My next project will be modding another CD63 SE 😛
Have been away from this forum for some time busy in carrying out modding my CD63 MKII KI. Now the project has been completed with great success and here are a few photos showing the work that I have done.
My next project will be modding another CD63 SE 😛
