Thanks Andrew. You are right, see this excellent site for the details: http://www.tnt-audio.com/clinica/ssps2_e.html
And the corrected schematic in case some else want to use it...
Any other comments are welcome.
And the corrected schematic in case some else want to use it...
Any other comments are welcome.
Attachments
So you mean to mount the bypass caps directly at the PCB and not on the big electrolytics caps. Am I right?
Thanks. I'll do that.
On some Classe big power amps, there is a bypass caps on each power transistors duplets. Is it an other way to implement the bypass caps that can be even better?
On some Classe big power amps, there is a bypass caps on each power transistors duplets. Is it an other way to implement the bypass caps that can be even better?
P. S. : In every time you must imagine it like tube with small diameter ( wire ) and barel ( capacitor ). Water is energy acumulated in barel. If you need energy fast, you pour out water at place quickly, but through tube slowly. Is all clear now ? 😉
By " water, tubes, ventiles etc. " you can explain every electronic circuits ( I think except tunel phenomenon 😎 ).
If thats the case, then all this "water" talk makes me want to go dump some "amperes" into the "load" because the voltage is high.... cya! 😉
Can you say it by different words, sorry, but my " english " is rather " from wild forest " 😉 .
OK, I see 
, exist also " high necessity ", which have rather different physical laws , than " high fidelity " 😉 .
, exist also " high necessity ", which have rather different physical laws , than " high fidelity " 😉 .
Pavel,
Its fun to read your writings, Let me ask you , do you use some kind of automated translator like Babel fish etc, if not, Talk like Yoda you do.
Jacco, Size of drain does not matter if the ESR is low....
Its fun to read your writings, Let me ask you , do you use some kind of automated translator like Babel fish etc, if not, Talk like Yoda you do.
Jacco, Size of drain does not matter if the ESR is low....
No, I don't use it, only dictionary. In english I'm self - tauhgh person, so sometimes are my word probably strange meaning for natural englismen 😎 : But I hope that in future it will be better 😉 , be patient with me.
"By " water, tubes, ventiles etc. " you can explain every electronic circuits ( I think except tunel phenomenon )."
Like wow man.... I think these dudes spent some time in Hyde Park back in the 60's like man ya know......
Like wow man.... I think these dudes spent some time in Hyde Park back in the 60's like man ya know......
DC blocking
See explanation
http://www.diyaudio.com/forums/showthread.php?s=&threadid=2080&highlight=
(there's schematic on page 2)
or
http://www.diyaudio.com/forums/showthread.php?s=&threadid=39895&perpage=10&highlight=&pagenumber=1
or
http://www.diyaudio.com/forums/showthread.php?s=&threadid=41476&highlight=
(to see Bryston approach)
Do some more searching on DC blocking. Mark Levinson and Bryston use it extensively, and many aftermarket (some obscenely expensive!) units do exactly the same. You may not need it initially, but one day your neighbour buys a lamp dimmer or whatever that will cause DC offset and you'll be sorry that you didn't leave enough room in the chasis. I suppose you can always go external, I just prefer it all in one box.
BTW, my toroids are nothing special, but not cheap either (UK made - RS components), and I had to make DC blocker circuit.
Bratislav
Algar_emi said:
See explanation
http://www.diyaudio.com/forums/showthread.php?s=&threadid=2080&highlight=
(there's schematic on page 2)
or
http://www.diyaudio.com/forums/showthread.php?s=&threadid=39895&perpage=10&highlight=&pagenumber=1
or
http://www.diyaudio.com/forums/showthread.php?s=&threadid=41476&highlight=
(to see Bryston approach)
Do some more searching on DC blocking. Mark Levinson and Bryston use it extensively, and many aftermarket (some obscenely expensive!) units do exactly the same. You may not need it initially, but one day your neighbour buys a lamp dimmer or whatever that will cause DC offset and you'll be sorry that you didn't leave enough room in the chasis. I suppose you can always go external, I just prefer it all in one box.
BTW, my toroids are nothing special, but not cheap either (UK made - RS components), and I had to make DC blocker circuit.
Bratislav