Just another Aleph

[PedroPO]

fcel

acad it is. I exported to bmp and then converted it to jpeg with photoshop.

autocad cmd: bmpout

 

[jleaman]

yeah me too i cant wait then i am going to buy a new pair of either paradigm studio 100's or a pair of energy towers. one or the other..

 

[Peter Daniel]

Pedro,

Your amps layout makes sense now. I couldn't do better myself.

 

[PedroPO]

Peter Daniel

do you think that the copper bar is some kind of thermal resistor?

is it better to bolt the mosfets down directly to the sinks?

 

[Peter Daniel]

In your case if you want to use 6 mosfets (with a board) on 3 sinks per side you need some sort of a plate to spread the heat. There was another thread dealing with this issue when you mount devices directly to a spreader copper plate without insulator. The copper board increase the heat transfer from the device and then using insulator its attached to a sink making the actual heat transfer form FET to the sink better. But in your case 3 of the FETs are on positive rail and the other 3 on negative so it's not possible to mount them without insulator on the same plate.

Anyway your sinks are big eniugh so the plate's heat resistance is not a problem

 

[jleaman]

can any one give me a pos or neg feed back on the paradigm studio 100's or the Energy Connoisseur veritas c-9's

or any sujestions to other towers. that are biamp able.

J'

 

[jleaman]

http://www.energy-speakers.com/connoisseur/connoisseur_speakers1_spec.html

energy speakers.

paradigm


http://www.paradigm.com/Website/SiteReferenceProduct/RModels/StudioSeries/StudioSpecs.html

 

[Coulomb]

Veritas is Latin for Truth