how about using these woofers http://www.ebay.co.uk/itm/6-5-Inch-...Elec_SpeakersPASystems_RL&hash=item1c21ff5eee
?
There are no detailed specs on those. If you can find them we can have a look.
But what about the dual JBL's?
no im not a femaleEwww a
im not sure, most people have said they dont model well so ive got someone designing me another L ported box, but if you've got another idea ?
Oooo -well then... Hope you are not offended.
In the US one could probably sue their own parents for that 😀
We are very bland when it comes to names over here IMO.
However if you were from the US and your parents had chosen to name you Ashley your Father most certainly wold have insisted on giving you a very masculine middle name, likely Judd - and for that I'm 100% you could sue. I'll
nowIt will work just fine. Do you prefer a single fold that's somewhat simpler to build, or the double fold style shown in these threads? What material thickness do you prefer?
i dont really mind the folds, how ever many it takes to get the best sound i'll do it 🙂 and i use 15mm or 18mm mdf
You may want to use the 18mdf for a heavy woofer - like the Jbl.
Do you have 18mdf over there? Not sure we do here in the USA, but 18mm is available in medex. btw, medex cuts wayyy nicer, doesn't fly around the room as much, well worth the extra $$ and lead time.
Do you have 18mdf over there? Not sure we do here in the USA, but 18mm is available in medex. btw, medex cuts wayyy nicer, doesn't fly around the room as much, well worth the extra $$ and lead time.
yeah we get 18mm here, i use a wood cutting service at "homebase" in the uk they cut the sheet for about £40 here, which isnt bad for a hole sheet plus cuts
Looks familar. You'll want to get the rips for the folds all the same, or as close as you can get them. What tools do you have on hand?
www.homebase.co.uk
www.homebase.co.uk
i only have a sander, planer and a jigsaw at the moment, ive never neaded anymore because i get the wood cut at homebase
This has been a fantastic read. I'm eager to see more impressions of the final product.
Nice work!
Nice work!
I think I'm beginning to see why your wife wanted to talk to me now. 😉
I'll get to the P2 design in a day or so 😛
I'll get to the P2 design in a day or so 😛
That's way too deep, go ahead and remove the cosmetic cover and show us what's underneath. 1/2" is plenty to hold the screws as long as you don't countersink the driver.
- Status
- Not open for further replies.