Ian,
Thank you very much for your work. There is no problem with a bit of waiting, we know you have something working really good (not like some others 😉 ).
Thanks again.
Thank you very much for your work. There is no problem with a bit of waiting, we know you have something working really good (not like some others 😉 ).
Thanks again.
Hi Ian,
Thanks for your dedication, Good things are well worth waiting for!
Best Regards,
James
Thanks for your dedication, Good things are well worth waiting for!
Best Regards,
James
I agree with the above Ian; what you're doing for this community is already above and beyond. I could install it today in my project, but I'm content to wait. Your work/sacrifice is greatly appreciated!
Ian,
Thank you very much for your work. There is no problem with a bit of waiting, we know you have something working really good (not like some others 😉 ).
Thanks again.
Hi Ian,
Thanks for your dedication, Good things are well worth waiting for!
Best Regards,
James
I agree with the above Ian; what you're doing for this community is already above and beyond. I could install it today in my project, but I'm content to wait. Your work/sacrifice is greatly appreciated!
Thanks guys. I'm great. Adapter PCBs re-ordered yesterday and will be ready by next weekend. Things are keeping going very well. Just hope I could catch up with the schedule.
thanks again for your support.
Ian
Hi Ian
Not that I wish to get slap from qusp..😎, far from that and absolutely no rush...
But just to let You know, I'm not at BIII bandwagon, well actually BII 😀, so I would be more than happy to get Your kit without BIII board.
I hope James will forgive me stealing his sentence but absolutely:
"Good things are well worth waiting for!"
Thanks for Your efforts, and all the Best...
Rosendorfer
Not that I wish to get slap from qusp..😎, far from that and absolutely no rush...
But just to let You know, I'm not at BIII bandwagon, well actually BII 😀, so I would be more than happy to get Your kit without BIII board.
I hope James will forgive me stealing his sentence but absolutely:
"Good things are well worth waiting for!"
Thanks for Your efforts, and all the Best...
Rosendorfer
Hi Ian,
I would like to buy 4 clock adapter boards and 2 Buffalo III adapter boards.
I purchased I2S FIFO KIT, Dual XO Clock board and S/PDIF Interface Board in the first run of the GB.
Thanks!
I would like to buy 4 clock adapter boards and 2 Buffalo III adapter boards.
I purchased I2S FIFO KIT, Dual XO Clock board and S/PDIF Interface Board in the first run of the GB.
Thanks!
Hi Ian
Not that I wish to get slap from qusp..😎, far from that and absolutely no rush...
But just to let You know, I'm not at BIII bandwagon, well actually BII 😀, so I would be more than happy to get Your kit without BIII board.
I hope James will forgive me stealing his sentence but absolutely:
"Good things are well worth waiting for!"
Thanks for Your efforts, and all the Best...
Rosendorfer
Hi Ian,
I would like to buy 4 clock adapter boards and 2 Buffalo III adapter boards.
I purchased I2S FIFO KIT, Dual XO Clock board and S/PDIF Interface Board in the first run of the GB.
Thanks!
Thanks guys, forgive me but I'm afraid you have to put up with that adapter board 😛
Good night.
Ian
Hi everyone,
could somebody please give me some light about those clock adapter and buffaloIII boards ?. I have a Buffalo III DAC as well.
There has been a couple of months since I bought the FIFO a dual XO clock and it seems that I am missing something hot in here.
cheers
Pepe
could somebody please give me some light about those clock adapter and buffaloIII boards ?. I have a Buffalo III DAC as well.
There has been a couple of months since I bought the FIFO a dual XO clock and it seems that I am missing something hot in here.
cheers
Pepe
Hi everyone,
could somebody please give me some light about those clock adapter and buffaloIII boards ?. I have a Buffalo III DAC as well.
There has been a couple of months since I bought the FIFO a dual XO clock and it seems that I am missing something hot in here.
cheers
Pepe
First order lost by DHL. Re-ordered again. Will arrive next week. Including universal SMT XO adapter, U.FL to BIII input adapter and BIII async mode adapter. If you are GB I user and did get, you still have chance to get one for free.
Ian
1 JamesHill 1*I2S FIFO KIT 1*Dual XO Clock board 1*S/PDIF Interface Board
2 chansiukwing
3 lordvader 1*I2S FIFO KIT 1*Dual XO Clock board
4 karvid 1*I2S FIFO KIT 1*Dual XO Clock board
5 Blitz 1*I2S FIFO KIT 1*Dual XO Clock board S/PDIF Interface Board
6 daanve I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
7 Turbon I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
8 slartibartfasstI2S FIFO KIT -Dual XO Clock board
9 merlin2069er 1*I2S FIFO KIT 1*Dual XO Clock board
10 roger57 1*I2S FIFO KIT 1*Dual XO Clock board, confirmed right justified 16/24 support
11 andrea_mori 2 * I2S FIFO KIT - 1 * S/PDIF Interface Board-4 * 6" (need support left-justified format for SM5842)
12 ryanj 1*I2S FIFO KIT 1*Dual XO Clock board
13 Rupor54 I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
14 roenderI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
15 regalI2S FIFO KIT -Dual XO Clock board
16,17 PET-240I2S (FIFO KIT -Dual XO Clock board -S/PDIF Interface Board)*2
18 lwifI2S FIFO KIT -Dual XO Clock board
19 vd-twoI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
20 hochopeperI2S FIFO KIT -Dual XO Clock board
21 necplusultraI2S FIFO KIT -2* Dual XO Clock board
22 lllI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
23 NicMacI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
24 SPWONG I2S FIFO KIT -Dual XO Clock board
25 MisterRogers I2S FIFO KIT -Dual XO Clock board
26 Atom6422 1 x I2S FIFO KIT 1 x Dual XO Clock board 2 x 12” coaxial cable
27 hirez69 FIFO KIT, Dual XO Clock board, S/PDIF Interface Board,6 X SMT U.FL 4 X 6” and 2 X 4” double-ended U.FL cables (and 14 XO adapter PCBs)
28,29 elecon FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
30 Rosendorfer I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
31 zinsula S/PDIF Interface Board
32 analog_sa1 x I2S FIFO KIT 1 x Dual XO Clock board 3 x 4” coaxial cable
33 tjencks 1 x I2S FIFO KIT 1 x Dual XO Clock board 3 x 4”
34 mravinsky 1 x I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
35 neb001neb00135 neb0011x I2S FIFO KIT - Dual XO Clock board kit
36 ccliu I2S FIFO KIT x1 Dual XO Clock board x1 S/PDIF Interface Board x1
37 florianderton I2S FIFO KIT, Dual XO Clock board, S/PDIF Interface Board
Please let me know for any question.
Ian
Hi Ian,
I have a question. I'm not sure what you mean by "confirmed right justified support"? I don't recall asking for any particular format, just indicating I have a TDA1541A. The TDA1541A is left-justified, correct?
Please clarify.
Thanks,
Gary
I also want to run on TDA1541. Do I need a FW change or are these all set by jumper?
Thanks Ian, hope all is going well!
Your efforts are appreciated!
Thanks Ian, hope all is going well!
Your efforts are appreciated!
Hi Ian,
I have a question. I'm not sure what you mean by "confirmed right justified support"? I don't recall asking for any particular format, just indicating I have a TDA1541A. The TDA1541A is left-justified, correct?
Please clarify.
Thanks,
Gary
I just checked my schematic and the TDA1541A datasheet. I'll have pin 27 of the TDA1541A tied to VCC, indicating it's I2S (mux'd 2's compliment)
Not sure if that means a firmware or jumper change on the board...
Thanks,
Gary
With PIN27 connected to Vcc,TDA1541 works at I2S mode. You don't need setting any jumpter. FIFO default output format is I2S.I just checked my schematic and the TDA1541A datasheet. I'll have pin 27 of the TDA1541A tied to VCC, indicating it's I2S (mux'd 2's compliment)
Not sure if that means a firmware or jumper change on the board...
Thanks,
Gary
Ian
With PIN27 connected to Vcc,TDA1541 works at I2S mode. You don't need setting any jumpter. FIFO default output format is I2S.
Ian
OK, thanks Ian.
If not too late (I imagine you're swamped with requests too) can you add a couple of 6" coaxial cables to my order?
Gary
OK, thanks Ian.
If not too late (I imagine you're swamped with requests too) can you add a couple of 6" coaxial cables to my order?
Gary
That's no problem.
Ian
Got PCB today
Got those adapter PCBs today finally! I made right decision, re-ordering the PCB immediately after found lost. The DHL investigating still under going, I don't think they could find anything.
I'll do some test and let you know the result tomorrow.
Have a good night
Ian
Got those adapter PCBs today finally! I made right decision, re-ordering the PCB immediately after found lost. The DHL investigating still under going, I don't think they could find anything.
I'll do some test and let you know the result tomorrow.
Have a good night
Ian
Attachments
Hi everyone out there!
I have ordered a FIFO kit and dual clock board. But since I have been reading about a BIII converter/adapter I wounder if this is needed for my BII dac?
Havn't seen any schematic so I do not really know which signal I get out from the FIFO, but is some signal missing that I need for my BII dac?
Thanks!
/ Kenneth
I have ordered a FIFO kit and dual clock board. But since I have been reading about a BIII converter/adapter I wounder if this is needed for my BII dac?
Havn't seen any schematic so I do not really know which signal I get out from the FIFO, but is some signal missing that I need for my BII dac?
Thanks!
/ Kenneth
- Home
- Group Buys
- Ian asynchronous I2S and S/PDIF FIFO KIT group buy