Hi Ian,
do you have still available the S/PDIF board ?. I totally forgot about this and never sent you my order by email.
Thank you,
Pepe
Yes, I still have some left. You can order now.
Thanks,
Ian
Hi Ian,
Just want to know whether the daughter adapter board to interface FIFO with AD1865 be available.
I would like to use it with my Audio Note DAC which uses AD1865 in non-oversampling mode.
Thanks.
Just want to know whether the daughter adapter board to interface FIFO with AD1865 be available.
I would like to use it with my Audio Note DAC which uses AD1865 in non-oversampling mode.
Thanks.
I as well ordered in one of my posts already the spdif board ...you have not updated that sofar...THX
Just correct some mistakes, updated is listed below
1 JamesHill 1*I2S FIFO KIT 1*Dual XO Clock board
2 chansiukwing
3 lordvader 1*I2S FIFO KIT 1*Dual XO Clock board
4 karvid 1*I2S FIFO KIT 1*Dual XO Clock board
5 Blitz 1*I2S FIFO KIT 1*Dual XO Clock board
6 daanve I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
7 Turbon I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
8 slartibartfasstI2S FIFO KIT -Dual XO Clock board
9 merlin2069er 1*I2S FIFO KIT 1*Dual XO Clock board
10 roger57 1*I2S FIFO KIT 1*Dual XO Clock board
11 andrea_mori 1 * I2S FIFO KIT - 1 * S/PDIF Interface Board (need support left-justified format for SM5842)
12 ryanj 1*I2S FIFO KIT 1*Dual XO Clock board
13 Rupor54 I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
14 roenderI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
15 regalI2S FIFO KIT -Dual XO Clock board
16 PET-240I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
17 lwifI2S FIFO KIT -Dual XO Clock board
18 vd-twoI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
19 hochopeperI2S FIFO KIT -Dual XO Clock board
20 necplusultraI2S FIFO KIT -2* Dual XO Clock board
21 lllI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
22 NicMacI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
23 SPWONG I2S FIFO KIT -Dual XO Clock board
24 MisterRogers I2S FIFO KIT -Dual XO Clock board
Thanks
Ian,
As per my last PM, I'll need the FIFO kit only, please remove the dual XO board.
Thanks,
Gary (roger57)
you cant just plug any old clock in, you just going to use the single clock?
right.
right.
sure, i'll take the dual xo board in that case. I was planning on using an old clock I had.
Ian, keep me in for a dual xo board.
thanks.
yeah you would be better off using Ian's single clock than an external clock, unless you had plans to integrate it very well somehow. it needs to be able to respond to commands from the fifo board. otherwise the dual XO board is a nobrainer IMO
yeah you would be better off using Ian's single clock than an external clock, unless you had plans to integrate it very well somehow. it needs to be able to respond to commands from the fifo board. otherwise the dual XO board is a nobrainer IMO
right....so I will keep it on order then.
thx.
=) soz, didnt mean to bully (wheres that bat?) i'll be keen to try different clocking regimes with the fifo, I expect over time some people will develop 3rd party designs to work with it, I dont see this project going away any time soon
1 JamesHill 1*I2S FIFO KIT 1*Dual XO Clock board 1*S/PDIF Interface Board
2 chansiukwing
3 lordvader 1*I2S FIFO KIT 1*Dual XO Clock board
4 karvid 1*I2S FIFO KIT 1*Dual XO Clock board
5 Blitz 1*I2S FIFO KIT 1*Dual XO Clock board
6 daanve I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
7 Turbon I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
8 slartibartfasstI2S FIFO KIT -Dual XO Clock board
9 merlin2069er 1*I2S FIFO KIT 1*Dual XO Clock board
10 roger57 1*I2S FIFO KIT 1*Dual XO Clock board
11 andrea_mori 1 * I2S FIFO KIT - 1 * S/PDIF Interface Board (need support left-justified format for SM5842)
12 ryanj 1*I2S FIFO KIT 1*Dual XO Clock board
13 Rupor54 I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
14 roenderI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
15 regalI2S FIFO KIT -Dual XO Clock board
16,17 PET-240I2S (FIFO KIT -Dual XO Clock board -S/PDIF Interface Board)*2
18 lwifI2S FIFO KIT -Dual XO Clock board
19 vd-twoI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
20 hochopeperI2S FIFO KIT -Dual XO Clock board
21 necplusultraI2S FIFO KIT -2* Dual XO Clock board
22 lllI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
23 NicMacI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
24 SPWONG I2S FIFO KIT -Dual XO Clock board
25 MisterRogers I2S FIFO KIT -Dual XO Clock board
Thanks
Ian
Iam I think that since this is the version compatible with the PMD100 I want to change to the single clock board (don't need 48khs multiples), when the multiple format and splitter is released would be where I neeed he dual clock board, thanks for this wonderful project.
=) soz, didnt mean to bully (wheres that bat?) i'll be keen to try different clocking regimes with the fifo, I expect over time some people will develop 3rd party designs to work with it, I dont see this project going away any time soon
No problem, and thanks for the heads up. In any case, the dual XO is a good choice because I can experiment with chips other than the TDA1541

Hi Ian,
I would like to purchase
1 x I2S FIFO KIT
1 x Dual XO Clock board
2 x 12” coaxial cable
Thanks!
I would like to purchase
1 x I2S FIFO KIT
1 x Dual XO Clock board
2 x 12” coaxial cable
Thanks!
12" coaxial cable? also only 2? thats way too long IMO, even with such a good interconnection system as u.fl I think this is taking it too far, why do you need it so long? seems to me you need to work on your dac's layout before worrying about things such as the fifo if you need it this long
Waitling list May28,2012
1 JamesHill 1*I2S FIFO KIT 1*Dual XO Clock board 1*S/PDIF Interface Board
2 chansiukwing
3 lordvader 1*I2S FIFO KIT 1*Dual XO Clock board
4 karvid 1*I2S FIFO KIT 1*Dual XO Clock board
5 Blitz 1*I2S FIFO KIT 1*Dual XO Clock board
6 daanve I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
7 Turbon I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
8 slartibartfasstI2S FIFO KIT -Dual XO Clock board
9 merlin2069er 1*I2S FIFO KIT 1*Dual XO Clock board
10 roger57 1*I2S FIFO KIT 1*Dual XO Clock board
11 andrea_mori 1 * I2S FIFO KIT - 1 * S/PDIF Interface Board (need support left-justified format for SM5842)
12 ryanj 1*I2S FIFO KIT 1*Dual XO Clock board
13 Rupor54 I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
14 roenderI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
15 regalI2S FIFO KIT -Dual XO Clock board
16,17 PET-240I2S (FIFO KIT -Dual XO Clock board -S/PDIF Interface Board)*2
18 lwifI2S FIFO KIT -Dual XO Clock board
19 vd-twoI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
20 hochopeperI2S FIFO KIT -Dual XO Clock board
21 necplusultraI2S FIFO KIT -2* Dual XO Clock board
22 lllI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
23 NicMacI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
24 SPWONG I2S FIFO KIT -Dual XO Clock board
25 MisterRogers I2S FIFO KIT -Dual XO Clock board
26 Atom6422 1 x I2S FIFO KIT 1 x Dual XO Clock board 2 x 12” coaxial cable
27 hirez69 FIFO KIT, Dual XO Clock board, S/PDIF Interface Board,6 X SMT U.FL 4 X 6” and 2 X 4” double-ended U.FL cables (and 14 XO adapter PCBs)
Thanks guys, it seems have to start the jobs very soon.
Ian
1 JamesHill 1*I2S FIFO KIT 1*Dual XO Clock board 1*S/PDIF Interface Board
2 chansiukwing
3 lordvader 1*I2S FIFO KIT 1*Dual XO Clock board
4 karvid 1*I2S FIFO KIT 1*Dual XO Clock board
5 Blitz 1*I2S FIFO KIT 1*Dual XO Clock board
6 daanve I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
7 Turbon I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
8 slartibartfasstI2S FIFO KIT -Dual XO Clock board
9 merlin2069er 1*I2S FIFO KIT 1*Dual XO Clock board
10 roger57 1*I2S FIFO KIT 1*Dual XO Clock board
11 andrea_mori 1 * I2S FIFO KIT - 1 * S/PDIF Interface Board (need support left-justified format for SM5842)
12 ryanj 1*I2S FIFO KIT 1*Dual XO Clock board
13 Rupor54 I2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
14 roenderI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
15 regalI2S FIFO KIT -Dual XO Clock board
16,17 PET-240I2S (FIFO KIT -Dual XO Clock board -S/PDIF Interface Board)*2
18 lwifI2S FIFO KIT -Dual XO Clock board
19 vd-twoI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
20 hochopeperI2S FIFO KIT -Dual XO Clock board
21 necplusultraI2S FIFO KIT -2* Dual XO Clock board
22 lllI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
23 NicMacI2S FIFO KIT -Dual XO Clock board -S/PDIF Interface Board
24 SPWONG I2S FIFO KIT -Dual XO Clock board
25 MisterRogers I2S FIFO KIT -Dual XO Clock board
26 Atom6422 1 x I2S FIFO KIT 1 x Dual XO Clock board 2 x 12” coaxial cable
27 hirez69 FIFO KIT, Dual XO Clock board, S/PDIF Interface Board,6 X SMT U.FL 4 X 6” and 2 X 4” double-ended U.FL cables (and 14 XO adapter PCBs)
Thanks guys, it seems have to start the jobs very soon.
Ian
can I please add 6 x u.fl 100->120mm cables to ship with hochopepers order?
Ian can you add the above and 6 for me also.
So that would be total 12 x 4" u.fl cables and 4 x clock adapter boards for me (plus any if qusp wants more?) added to my order, qusp and I will split the costs up at our end so just send the amount to me.
Thanks
Hello Ian,
Thanks for providing your great service to the DIY community 🙂 I hereby register in this thread, as per the requirement, and I will place my actual order to you via e-mail.
Thanks for providing your great service to the DIY community 🙂 I hereby register in this thread, as per the requirement, and I will place my actual order to you via e-mail.
Hey Ian,
I will be looking at 6-8 adaptor pcb's as well.
Thanks,
Drew.
It seem I have to make more of that XO adapter board this time. 🙂
Ian
- Home
- Group Buys
- Ian asynchronous I2S and S/PDIF FIFO KIT group buy