I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,582
Hi ywh,

I received the lamp you sent for my xr-10x and followed the directions you sent on how to replace and adjust it inside my projector (the only ballast I have is the one in the projector). However, after adjusting for brightness just once. My projector shut off and the indicator lights indicated a faulty bulb. Upon inspection, I found some spots inside the new lamp. See attached picture. Is it damaged? If so, can I ship it back for a replacement?
 

Attachments

  • xr-10x bulb from ywh.JPG
    xr-10x bulb from ywh.JPG
    22.8 KB · Views: 199
#2,585
I'm looking for the optimal lamp for making a portable DC-powered search light. The primary requirement is the optimal combination of high luminance (cd/cm^2) and light output (lumen) available. Efficacy is also a consideration. Any reflectors would have to be removable for using a specialized high-grade 9"+ parabolic reflector.

There are so many UHP type lamps available now, but there's very little info about their actual average luminance and their powering and igniting requirements.

Any suggestions from anyone with experience with newer UHP type lamps?
 
#2,595
Hi Ywh! I got interesed about bulbs for iPAQ MP1200 (LCD) and HP vp6120 (DLP) projectors. I can't give you old lamp part number for iPAQ, because it lost. Old lamp of HP is in projector, if you need i can see it. How many are they will be cost and what about shipping in Moscow (Russia)? Thank you very much.
 
#2,596
Hi ppride!
I have the burner, but that is not easy to rebuild that lamp
you can send your reflector to me , I can rebuikd it, total is $105, in include shipping

Hi jgeorg!
you need 150w BSM-DC, price is $80. shipping is $5, fee of paypal is $4

Hi aaabor !
there is a ballast in your projector if you have a Sharp XR10X. that is a part of power board maybe

Hi floxx !
iPAQ MP1200 is 130W UHP, HP vp6120 is 250w UHP, right?
price is $80 each, shipping is $5 total, fee od paypal is $4 each
 
#2,597
Hi ywh, I have four Infocus x2 projectors with lamps burned out. I tried to buy new lamp, but it costs almost as new projector. On the rear of the lamp it is written SHP 58 Hg. Have you these lapms, and what about cement and shiping to Zagreb (Croatia).
Thanks
 
#2,599
need lamp for Proxima DP5800 lcd projector please

Hello DHY..
I bought just a lamp for my projector from you once that did not work. I guess it wouldn't be possible to exchange it for a different one after this long, but if it would that would be great. The one I got from you shuts on and off. I assume I got the wrong one. Somebody told me if I don't have the one exactly for that PJ, it won't work. Here is a video of the symptom:

DP5800.flv video by pfloydphanatic - Photobucket
 
Status
Not open for further replies.
Top Bottom