I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,362
Hi Jorgen1 !
you need 200w BSM-DC, price is $80, shipping is $5, total is $89 include fee of paypal

Hi FDC2007 !
you need 270w BSM-DC, price is $80, shipping is $5, total is $89 include fee of paypal

Hi hobbe
you need 200w BSM-DC, price is $80, shipping is $5, total is $89 include fee
of paypal

Hi rcavictim !
chance is 100%, but the 160 watt metal halide has short lift if that is DC lamp.

Hi miatawnt2b !
you need 200w BSM-DC, price is $80, shipping is $5, total is $89 include fee of paypal

Hi Jorgen1
you can send to 568391655@qq.com
 
#2,363
Hi ywh,

Will you please confirm that you received my paypal payment for the 150w JYD/AC bulb? I sent the payment on January 30th. The name on the payment is Jason E. from Florida.

Thanks!



cmdrdata,

I was thinking about a similar solution as what the Frenchman used in the video, instead of cement. Should be a lot cleaner, at least.
 
#2,364
Hi YWH,
I read through the whole thread (took me awhile) but I can't find a mention of the PJ I need a burner for.
It's a Sharp XG-E690U and it has a 275W Metal Halide according to spec.
The old burner exploded, so I can't send a picture showing the electrodes, they are gone.

The burner sits on top of the reflector, is double ended and the length of the burner is about 7cm. The markings on the ceramic socket say:

U250W 6Z0909

Do you have a compatible burner?
 
#2,370
WHAT ARE THE RIGHT BULBS?

Hi Ywh,
My name is Martin, I would like to buy one or two lamps for my projector
infocus sp4805 on the back of lamp it is written SHP58 Hg

According to some forums I should be using a JYd lamp but it looks more

like JYs-SE lamp. I also know that the bulb is a 200 watt but I am not sure A.C. or D.C.

I would be more on the side of D.C. Can you help me decide because if this purchase works out i will be buying more bulbs from you in the near future.

Martin, Thanks in advance

mvboiss@personainternet.com


Brightness: (max ANSI lumens)
High Bright: 750 Lumens
Eco Mode: 600 Lumens
Lamp Wattage:

High Bright: 200 Watts
Eco Mode: 160 Watts
 
#2,377
Hi toddmc1967 !
I can not found any inf of your projector, what is the words on your reflector ?

Hi studmuffin1023
infocus sp4805, 200w SHP. you need 200w BSM-DC, price is $80, shipping is $5, total is $89 include fee
of paypal

Hi cyborat !
is your lamp 200 / 160 Watt UHP ?

Hi cabintexas !
you need 200w BSM-DC, price is $80, shipping is $5, total is $89 include fee
of paypal

Hi hoffman!
the posoffice attempted to deliver your item at 12:23 PM on February 14, 2009 in ATHENS, OH 45701 and a notice was left. It can be redelivered or picked up at the Post Office ;-(
RR39 6105 516C N
http://trkcnfrm1.smi.usps.com/PTSInternetWeb/InterLabelInquiry.do

Hi ironhardware!
is your lamp 250W NSH ? I have the burner, need 250w BSM-DC, price is $80, shipping is $5, total is $89 include fee
of paypal
 
#2,380
BenQ PE7700

Ni Hao Yu,

I would like a bulb for a BenQ PE7700 projector.

The code for the lamp assembly is 59.J0C01.CG1.

The bulb/reflector type is OSRAM P-VIP 250/1.3 E21.8

It appears that your replacement BSM-AC bulbs would be compatible, but are only maximum 200W, whereas I need 250W.

Are you able to special order 250W BSM-AC? I am prepared to pay extra if needed. Let me know.

Could you also provide the reflector to suit? What is the price and postage?

Thanks and regards,
Phil
 
Status
Not open for further replies.
Top Bottom