I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,141
Hi. I am looking for a replacement bulb for my Sanyo Z3. It says:
HS130AR10-6
and
1AV4T30B06800
on it.

Which bulb, and where do I get the current price list in US$?

I understand that I need "fireplace" cement, which I am sure I can find. Is there a basic tutorial on how to swap the bulbs out of the housing?

Thanks.
 
#2,142
LT260 Bulb

Hi yuweihua,
I canceled an order with you a couple of weeks ago.
The money I transferred using moneybookers.com is still in your account.
I have a different projector now.
It’s an NEC LT260.
Please use the money I previously transferred to you to send me:

1 - JYs-SE lamp (Single-ended) 200W

I believe the cost is $45? I just sent you an email also.
Let me know if that is okay.

Thanks!
 
#2,144
ywh said:
Hi !
the cement is from fireplace, it is heat-resistant cemnet .
a few scratch ios OK, can you show picture of yours?
your email addresss refuse my mail.
Click to expand...

This is a picture of the bulb and housing. I only need the bulb (InFocus LP500). The bulb is a sealed bulb that is simply screwed into the housing. I don't understand the need to cement anything. I will be glad to purchase a complete bubl and install it into the housing.

Is it possible to pay 16wheeler through paypal or do you prefer paid directly through you? I'm currently traveling in Singapore and Australia and will be returning in a coupl weeks. I can send the money immediately if I can get an answer on whether I'm getting a complete bulb or must the bulb itself be put together?

Thank you.

my email has no spam filter.
wm.schamp@gmail.com
or
wm.schamp@pricephysics.com
 

Attachments

  • thumbnail_infocus.jpg
    thumbnail_infocus.jpg
    35.8 KB · Views: 235
#2,145
lamp DT-00581 or VLT-SE1LP

Hi
ywh and anyone else thanks:

i have a hitachi cp-s210 prpjector and globe has blown in it. could i please buy new globe (have read in this forum that i could buy for 80 plus 25 dhl?? 🙂

also would love instructions on how to change it. the projector is attached to a 12ft ceiling upside down,
thanks very much
 
#2,149
ywh - questions about lamps

ywh,
I am really hoping that you have some answers. I am stuck with two projectors that need lamps. I see you have a lower cost alternative. I have some questions before ordering.

How do you re-align the burner in the reflector to the correct position?
What kind of performance can I expect from these lamps? Hours? Color temp?
I am a little weary of blindly sending money? No offense to you ywh but I have been burned more than once by deals that sounded too good to be true. Can you put my fears to rest?

I may have need to order many bulbs if this is a good way to go. I use many different projectors in my job.

Here are numbers from two of my projectors:
Sanyo PLC-XU31 - uhp200w1.3 - 1av4t30b05400
Mitsubishi X490U - SHP47


Thank you
 
#2,150
Hi nickbuol
you need 130w BSM-AC, price is $80,shipping is 5$
send a email to me, I can send some inf to you.
I can take moneybookers only
www.moneybookers.com

Hi dre_bake
you need 270w BSM-DC, price is $80.shipping is 5$
you have to ask 18wheel before you send money.

Hi DrLogic !
you need 130w BSM-AC, price is $80.shipping is 5$. $25 for DHL is OK, but never lost paxkage from China to Australia by postoffice ( 5$ ),

Hi ankitgupta711
I sent to india.

Hi crazifunguy
you need 200w BSM-DC, price is $80.shipping is 5$
what is a suplier for prarbolic reflectors?

Hi lorolytle !
I can take moneybookers only
www.moneybookers.com

Hi Sgraham !
Sanyo PLC-XU31 - uhp200w1.3 - 1av4t30b05400
need 200w BSM-AC, price is $80.shipping is 5$
the lamp of Mitsubishi X490U - SHP47 is 300w shp, I have no
 
#2,151
ywh said:
Hi DrLogic !
you need 130w BSM-AC, price is $80.shipping is 5$. $25 for DHL is OK, but never lost paxkage from China to Australia by postoffice ( 5$ ),

Click to expand...

Thank you for your patience.
Mine is wearing out . . .

I tried to register with www.moneybookers.com so I could send you your money but they say they can't register me if I live in the United States.

Since I'm currently in Singapore and will be in Australia next week, do you want me just "SAY" I live in one of those locations and you can still just send the bulb to my United States address?

Please advise so I can complete this transaction
 
#2,152
ywh said:
Hi nickbuol
you need 130w BSM-AC, price is $80,shipping is 5$
send a email to me, I can send some inf to you.
I can take moneybookers only
www.moneybookers.com

Hi dre_bake
you need 270w BSM-DC, price is $80.shipping is 5$
you have to ask 18wheel before you send money.

Hi DrLogic !
you need 130w BSM-AC, price is $80.shipping is 5$. $25 for DHL is OK, but never lost paxkage from China to Australia by postoffice ( 5$ ),

Hi ankitgupta711
I sent to india.

Hi crazifunguy
you need 200w BSM-DC, price is $80.shipping is 5$
what is a suplier for prarbolic reflectors?

Hi lorolytle !
I can take moneybookers only
www.moneybookers.com

Hi Sgraham !
Sanyo PLC-XU31 - uhp200w1.3 - 1av4t30b05400
need 200w BSM-AC, price is $80.shipping is 5$
the lamp of Mitsubishi X490U - SHP47 is 300w shp, I have no
Click to expand...


Same problem as drlogic cannont register with moneybookers.com for they will not accept people from USA please advise
 
#2,154
x1 bulb replacement

Hello all. I am new to this forum and trying to replace my Infocus x1 bulb. The bulb exploded and I have no way to make any measurements on the old one. I was also curious if anyone had detailed instructions on how to replace the bulb?
 
#2,155
DrLogic said:


Thank you for your patience.
Mine is wearing out . . .

I tried to register with www.moneybookers.com so I could send you your money but they say they can't register me if I live in the United States.

Since I'm currently in Singapore and will be in Australia next week, do you want me just "SAY" I live in one of those locations and you can still just send the bulb to my United States address?

Please advise so I can complete this transaction
Click to expand...

I too am in need of a bulb for an Infocus LP500 projector at a reasonable price, but I am confused regarding the wattage that ywh seems to be recommending. Stock lamp requires 270w SPH type, but ywh is recommending a 130w? ywh, would you please explain the difference? Also, is it true that the bulb just plugs in to the housing?

I will need to pay with Paypal also since I live in the US and moneybookers does not accept US residents.

Thanks!
 
#2,157
Hi DrLogic !
I can send bulb to any where.
I registered paypal today , but I have not used it, need to try.
paypal: yuweihua@163.net need some fee of paypay.

Hi lorolytle !
I registered paypal today

Hi ! L0g1cmaster
you need 270w JYS/DC bulb, price is $40, shipping is $5
It is burner only, without reflector
I can take moneybookers, longer time
www.moneybookers.com

Hi csj!
you need 150w BSM-DC bulb, price is $80, shipping is $5
It is burner only, without reflector
need your email too

Hi LadyStahr !
you need 270w JYS/DC bulb, I type wrong I think.

Hi cromugnon!
350 degrees is OK!
 
#2,158
ywh said:
Hi LadyStahr !
you need 270w JYS/DC bulb, I type wrong I think.
Click to expand...

ywh, I will need two. DrLogic has told me that the current bulb is removable and sets back in with star screws. Is there anything I need to know about putting the new bulb in (other than the fact that I need to wear clean dry gloves when handling the bulb) regarding how to aim the bulb properly?

My projector arrives today, I think, and I will be able to look at it and see if I can do this myself. Then I will send you paypal.

Thanks!
 
Status
Not open for further replies.
Top Bottom