YWH,
I have a Optoma HD65 projector. Is this the correct lamp to order from your site?
BSM-DC lamp 180W
My reflector says the lamp is "Phoenix 112 SHP 180W DC". But your FAQ page crosses out SHP lamp model: "BSM lamps replace UHP, --SHP--,"
http://diypro.xiaofish.us/faq.html#q3
Do you think the BSM-DC lamp 180W will work?
thanks,
xman
I have a Optoma HD65 projector. Is this the correct lamp to order from your site?
BSM-DC lamp 180W
My reflector says the lamp is "Phoenix 112 SHP 180W DC". But your FAQ page crosses out SHP lamp model: "BSM lamps replace UHP, --SHP--,"
http://diypro.xiaofish.us/faq.html#q3
Do you think the BSM-DC lamp 180W will work?
thanks,
xman
ywh said:Hi Ankit !
jys 200W DC can work, but not so bright, about 60-70% as SHP.
BSM-DC 200w is best. price is $80, shipping is $5.to everywhere.
Moneybooker is like payapl I think. I have to wait mail from 18 wheeler, so need more time.
Hi ywh,
I could not use moneybooker as it does not accept m master card. Anyways here is the confirmation of order through paypal.
I hope my lamp will be waiting for me in India.
Thanks,
Ankit.
Infocus LP530 and alternate higher wattage lamp
Is this possible. Have a LP530 lamp module, any-one out there with a lamp that would fit the unit. Seeking super-bright out-put, over 300watts.
Another option could be to install a reflector and small linear type lamp?
Obvious that the internal power supply wont be able to supply the juice, fans also will require up-grade; noisy projector.
Bored, and jsut want to make this unit fly out the lens for about a mile.
All rests on the lamp, YHW, got any ideas.
Is this possible. Have a LP530 lamp module, any-one out there with a lamp that would fit the unit. Seeking super-bright out-put, over 300watts.
Another option could be to install a reflector and small linear type lamp?
Obvious that the internal power supply wont be able to supply the juice, fans also will require up-grade; noisy projector.
Bored, and jsut want to make this unit fly out the lens for about a mile.
All rests on the lamp, YHW, got any ideas.
ywh said:Hi jason132pop !
do not try 300w. you will burn your DLP IC.
It's really possible ?
You seen ever “burning DLP IC”?
Hi ywh,
I would like to buy a new bulb to fit into my old reflector. I have a Yamaha LPX-500, which uses the same bulb as a Epson Powerlight TW100 and TS10.
It is a 150 Watt bulb and the projector is 800 lumens. Do you need more information?
I have a question too; Some 150w LCD projectors are 450 lumens, and others are over 1000 lumens. Is this because of a different bulb, or is it just to do with the projector design?
Thanks in Advance!
I would like to buy a new bulb to fit into my old reflector. I have a Yamaha LPX-500, which uses the same bulb as a Epson Powerlight TW100 and TS10.
It is a 150 Watt bulb and the projector is 800 lumens. Do you need more information?
I have a question too; Some 150w LCD projectors are 450 lumens, and others are over 1000 lumens. Is this because of a different bulb, or is it just to do with the projector design?
Thanks in Advance!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Everything Else
- The Moving Image
- DIY Projectors
- I got my new lamp. It is for commercial projection use. people use it to replace the