I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,021
Hi, I was just directed to this forum today, a great community by the looks of things.
My old beloved Panasonic AE100 blew her second bulb the other week (after a long life). I went out and bought a new PT- AX200E, thinking it may be a good time to upgrade.🙄
My old machine still works well, I have stripped it down a few times to clean the filters and panels, and seeing an alternative to an expensive lamp discussed here. I would like to have a go at replacing the globe instead of throwing the old girl in the bin. \
I have been over to http://www.diypro.us but am a little unsure of the correct bulb, and the specs on my current bulb are limited.
I need a replacement for a "ET-LAE100 lamp Type: 120W UHM". Could anyone assist with the correct replacement bulb?

Cheers
 
#2,023
TLPLV5 lamp replacement

Hi Ywh,
I give you some pictures :
url]

url]

url]

url]

url]


You can see there is a broken electrode and the other is burned 🙂
I hope these pictures helped you helping me 🙂

Sorry for my poor english.
Good bye
 
#2,030
ywh said:
Hi jason132pop!
you need 270W BSV-DC, not so bright, but only $40.Order via the site http://www.diypro.us/. OK!
can not do External ballast and super-bright lamp. it is 270w.

Hi Hynotech83 !
yes! it is DC. you need 200w BSM-DC, price is $80, shipping is $5.

Hi brcosminp !
you are the first man from Rumanian, nice to see you .
you need 200w BSM-DC too, price is $80, shipping is $5.that is a bulb only without reflector.about 1000hrs
Click to expand...


Hello YWH,

Was wondering If I can get discount on $80 since I tried paying for Bulb through http://diypro.xiaofish.us/lamps.html

Please let me know if possible how much i need to pay

If this works I will buy alot more from you....

Thank you

John'

Receipt from paypal transaction:

http://i26.photobucket.com/albums/c101/hypnotech1983/Picture2.png
 
#2,031
HELP!! Thanks YWH Got my New Bulb..

DOES Anyone know what the right position to put the replacement bulb in a Benq PE 8700 Housing???


My projector is displaying very dim with new bulb

I got the 200 NSH DC from YWH and installed


The details written on the Bulb are as follows:

NSH210BQA
325072205
GH2739
60.J2104.CG1
 
#2,032
Hi roybatty ! need to see ballast.
Click to expand...

Thanks for all your help on this ywh.

Here is a close up of the electrodes..

An externally hosted image should be here but it was not working when we last tested it.



And the ballast unit....

An externally hosted image should be here but it was not working when we last tested it.




I think if the only lamp you can get has the metal sleeve on on the tail end, I will still be able to fit it in my lamp housing.

Cheers
Roy
 
#2,035
#2,038
Hynotech83 said:



Hello YWH,

Was wondering If I can get discount on $80 since I tried paying for Bulb through http://diypro.xiaofish.us/lamps.html

Please let me know if possible how much i need to pay

If this works I will buy alot more from you....

Thank you

John'

Receipt from paypal transaction:

http://i26.photobucket.com/albums/c101/hypnotech1983/Picture2.png
Click to expand...


To my understanding its a trial and error sliding the bulb back and forth in the reflector till you find the brightest position,then ceramic the bulb in place.

I have not tried it yet but sounds fun🙂
hope this helps?😉
 
#2,039
mrpman said:
HELP!! Thanks YWH Got my New Bulb..

DOES Anyone know what the right position to put the replacement bulb in a Benq PE 8700 Housing???


My projector is displaying very dim with new bulb

I got the 200 NSH DC from YWH and installed


The details written on the Bulb are as follows:

NSH210BQA
325072205
GH2739
60.J2104.CG1
Click to expand...

sorry I meant to quote mrpman the 1st time


:smash:
 
Status
Not open for further replies.
Top Bottom