I got my new lamp. It is for commercial projection use. people use it to replace the

[ywh]

Hi jarkkoh !
is that OK when you install previous bulb now?

 

[alikfaster]

Hi YWH

Any news on the DT00521 ? If not available, how about for the Ed-x3270a Hitachi..?

Thanks

Ali

 

[jarkkoh]

Hi ywh

Cant test, previous bulb is broken. Had to cut glass to get it out of the reflector.

But it worked before i replaced bulb.
Is there any other way to test?
More load or less? If i add a resistor?

 

[jarkkoh]

Added 5ohm resistor to power line after warm up. Now voltage dropping stops 44-44,5v.

But now i have to say, Its AALIVEEE! 😀

 

[jarkkoh]

Ywh

Think that i need another bulb. Whats your suggestion?

 

[ywh]

Hi !jarkkoh
merry christmas!
I found a ballast as yours, run same type bulb, that is OK!
so i think the problem is your ballast .
you can send back the bulb, I will send bak your money.

 

[ywh]

Hi alikfaster!
do u have same INF of your bulb? name of bulb?

 

[jarkkoh]

Merry christmas you too, ywh!

No i try with that bulb, its not your problem that it wont work.
Do you have bigger ballast for me, with bigger bulb that works with it 100%?

How much? 🙂

Btw, did you measure voltage when tested, is it stable?

 

[alikfaster]

Hi alikfaster!
do u have same INF of your bulb? name of bulb?

Hi ywh..

My bulb is dt00521 150w UHB for Hitachi ed-x3270
(other name CPX-327)

Best Regards..


http://www.aboutprojectors.com/Hitachi-ED-X3270-projector.html

pdf is...

http://www.projektoren-datenbank.com/pdf/hitachi-eds3170edx3270-en.pdf

 

[ywh]

merry christmas! every one.


Hi !jarkkoh

you ac test the 2 wires that from main board to ballast, there is a 5v pressure on 2 wires when you type power on .
your main board is ok if there is a 5v.
so I can sell you other ballast if that is OK.

why you need bigger ballast ? I think 200w is OK.


Hi alikfaster!
price of bulb is $80, shipping is $5.

.

 

[recharge]

Hi ywh,
I just got back the original bulb for my projector, i wanted to see what i had to do before ordering one.
Will it matter that there is a small scratch in the reflective surface of reflector i assume this occured when the globe blew?

Regards

Richard

 

[birolo]

Hello ywh,

i need a bulb and cement for infocus x2, it is possible to have fastest shipment with dhl or fedex or what you want? I'd pay the difference.

 

[ywh]

Hell obirolo !
price of bulb is $80, shipping is $25 in DHL.

Hi recharge !
dont bother the small scratch, that will lost 5% brightness only.

 

[recharge]

Cool thanks
I guess i will sign up for moneybookers and order a globe in the next couple of days.
Can you please confirm price is in US dollars.

Regards

Rich

 

[ywh]

YES, USD!

 

[Pumbaa]

Hi ywh!

I have Davis Powerbeam V and it uses Osaram VIP R270W/45 lamp.
I think it is the same special JYs.
Do you can still order this lamp and how much it cost?

Thank you for this excellent thread

-Pumbaa

Hi again,

I broke that lamp, so can I buy one more?

-Pumbaa

 

[BHawthorne]

Hi, thanks for making this option available for us. It was hard to find this place though. I have a few InFocus SP5000 projectors. 2 of them have bulbs burnt out. I saw information earlier in the thread via search about the replacement bulb type, but wanted to ask for current information. Thanks,

-BHawthorne

 

[ywh]

happy new year!!!

Hi Pumbaa!
yes!
the price of special JYs is $40, shipping is $5
I can take moneybookers.

Hi BHawthorne
is your bulb 200w UHP?
this is a low v UHP.

 

[BHawthorne]

ywh: As far as I can tell, it is a 170W. The InFocus product name for is the SP-LAMP-017. It's compatible with the LP540, LP640, C160, C180 and SP5000. They show a 2000hour lamp life rating. The information I have on it is from newegg:

www.newegg.com/Product/Product.aspx?Item=N82E16824997403

 

[ywh]

OK! that is UHP, need BSM/AC, the price of BSM/AC is $80, shipping is $5