I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#1,041
JY lamps again

YWH - the JY lamp list is confusing me - as well as the previous post I looked at the Infocus LP350 listing (I have one of those as a work in progress - the subject of a separate post) and the JY replacement listed is a JYd275/AC, not DC ??

Also more on the NSH - some time ago you wrote:

"you can not use a Jyd in place of 180w NSH, but you can use a SHP in place of 180w NSH, they are same, DC, but the producer are not same."

If that's the case what could be used in place of an UMPRD190 (NSH)
 
#1,042
sensibull said:


Sorry to dig up an old post, but are you still using this lamp Prime. I scored one for very cheap and am curious how well it works in various reflector/condenser setups. Is the nipple on the end a problem with shadows? Are you using a spherical or parabolic reflector.

Thanks...
Click to expand...


wow. That's an old post. I now use an Osram HCI-TS 150W/942 powerball with a spherical reflector.

The nipple did not cast any shadows but the shape of curvature of the end of the lamp may cause a slight distortion or it could have been i didn't have it centered in my reflector properly. I thought the results where ok but go for a ceramic lamp if you can.
 
#1,043
Hi sensibull !
I dont know what is the nipple on the end a problem with shadows. but I can sell ellipsoidal or spherical reflectors.
ellipsoidal :
 

Attachments

  • 101_4896.jpg
    101_4896.jpg
    44.6 KB · Views: 534
#1,044
Hi! mrchoppah
recommendations: 120w-150w UHP/p-vip is the best one for bulb replacement , the price is $40 each,shipping is $5.

Hi mrpman
the price of original 180w bulb is $100,
my JYD/DC is not original , it can work, but not the best.
there are some risk when yo replace NSH with my JYD/dc, if it is more 200w.

Hi sabrex!
are you from Circle Road? or Payne Road? sabrex is not your name in email

Hi Eucyblues!
the pdf file is old, Infocus LP350 need JYS/DC 270W.
You can get a 180w SHP to replace your 190w NSH.
 
#1,045
ywh:

Hey can you help me out :xeye:

I am looking to buy a commerical pj. My question is, can any bulb be replaced or are there specific pjs it works on?

every pj I have looked at to replace the bulb it is around $300 to $500. I will be using this pj for a flight simulator and video games.

Any recommendations which is the best one for bulb replacement and where do I find the price?

Thx!!
 
#1,051
I would like to Purchase a bulb for X1 Specs

Hello YWH

I would like to purchase a bulb for my Infocus X1 / SP4800. \

The Bulb specs are as follows:

150 watt Super High Pressure ( SHP ) DC Arc Tube bulb.

Please E-mail me with the payment and purchase instructions.. Please let me know if there is a discount on orders for multiple bulb with the same specs.. 10 or more bulbs.

My Email is kappa_101@hotmail.com

Thanks in advance!
 
#1,053
Hi ywh,
I think you mentioned something about the bank of china before during this thread. I live in New york city so I can probably just go there to send you money. One problem though, there are many places with "bank of china" in its name though. There are branches for "People's bank of china", "Central bank of china", and just "Bank of china". Do you know which one is your bank?
 
#1,054
Hi sabrex !
this is my bank:
http://www.bocusa.com/bocny/
my bank? mine 🙂

Hi X-TraxxX !
I sent email to you

Hi Poseablejesus !
18 wheeler come back, contact again.

Hi Eucyblues !
my friend run this SHP in 210w NSH ballast, That is OK!
we expect that lamp life is about 2000Hr when run in 190w NSH ballast

Hi TonkaTuff !
I can look for this enclosure and reflector, do you need reflector?

Hi jdlucas!
OK! I am waiting 18

Hi! mrchoppah
get the PJ if the lamp is 120w-150w UHP or p-vip, These lamp are easy to replace, low risk.
My JYD/AC bulb can replace These lamp , the price of JYD is $60 each,shipping is $5
that price($40) is clerical error
 
Status
Not open for further replies.
Top Bottom