I got my new lamp. It is for commercial projection use. people use it to replace the

[part2wanksta]

good news and bad news. good news is that the projector lit up. bad news is that it is super dim. very very dim. so ill take out the module and see if it is all aligned corectly

 

[ywh]

elektron !
yes! you can get 250w bulb, the little pvc tube is free;-)

thanks!
childsid,thank your help!

Hi ! jdlucas
yes, I can order this special JYS if you need.

Hi part2wanksta!
sorry my poor English, so I asked childsid help you.
you have to get a point of original bulb, of original arc , install new bulb in that point

 

[part2wanksta]

well it looks like i did that wrong. oh well.

hey do you know what kind of bulb this projector takes.

Mitsubishi LCD projector model LVP-SA51U

the manual says 150w uhp but many sell shp 150w bulb for it. which one is correct

 

[jdlucas]

Hi ywh,

Yes I would like to order the bulb. How much will cost? Do you still make payment arrangements through 18wheeler?

 

[superman21]

Hi,

I have an Infocus sp 4800 DLP projector that needs a new lamp.

The Infocus SP 4800 uses a 150W SHP lamp.

Would the replacement for an SHP lamp be JYd or JYs, AC or DC?


Thanks!

 

[ywh]

Hi part2wanksta
UHP is a AC lamp, the ballast is AC too. a DC lamp can not work well in a AC ballast .
what is the words on your original Reflector?

Hi jdlucas
price is $40 each, shipping is $5.
I still make payment arrangements through 18wheele.

Hi superman21
I have bran-new SHP bulb, it is perfect, from bran-new lamp kit.
$100 each, include shipping.
cheaper bulb is JYD/DC, $60 each, shipping is $5.

the pic is bran-new SHP bulb

 

[ywh]

from bran-new lamp kit, I pull the bulb out

 

[superman21]

Is this new SHP lamp 150W? Will work with my Infocus sp 4800 without problems? If I order it, how I make payment?

Sorry about my bad english 😉

 

[ywh]

Hi superman21 !

yes! this is new SHP lamp, work in Infocus sp 4800 without any problems,
3000hrs !

this type reflector can not be used,I have to use the bulb only.

 

[part2wanksta]

with my lp500 the bulb was to high up but it couldnt be lowered because the bulb was too long. therefore i couldnt get an optimal position. so i just sold it.

i recieved my Mitsubishi SA51U and i found out that it was actually shp 150w. at least that is what the manual states.

so this new bulb of your is $100 ???

here is a pic.

 

[ywh]

Hi part2wanksta

2 type:

1, bran-new SHP bulb, it is perfect, from bran-new lamp kit.
$100 each, include shipping.

2, JYD/DC, $60 each, shipping is $5.

the pic is bran-new SHP bulb

 

[BoomerBrian]

Successful Sanyo Z1?

Has anyone successfully replaced the Sanyo Z1 bulb? I read where someone had started but I never read the outcome.

Also. Can we expect the same picture quality as a new factory bulb if everything is done correctly?

Thanks,
Brian

 

[elektron]

ywh,

How much is it for the 250w lamp + lightbox (and socket). And how much does the ballast cost?

other question:

Do you have a replacement lamp for 200W SHP (infocus x2).

 

[ywh]

the price of 250w lamp + lightbox (and socket)is $80
shipping is $15, total is $95
what ballast do you need? you have a ballast .

I have replacement lamp for 200W SHP (infocus x2). $40

 

[elektron]

Because the ballast I have now is from a complete 250w hqi set. If I use only the ballast I cant use the hqi lamp and fitting.

 

[Dumbfounded]

UHE -UHP?

Hi ywh ,
I have a question.
My Epson 52c calls for 130w UHE bulb.
You mentioned I could not use JYD150 / AC in posts 909 through 911 because it may be different.
http://www.diyaudio.com/forums/showthread.php?postid=1081557#post1081557

It is listed as EMP-51/52 in this PDF:
http://www.diyaudio.com/forums/attachment.php?s=&postid=690828&stamp=1122477331
Is this chart correct?

 

[sabrex]

Hi ywh,
I just paypal'd 18wheeler the money for a jyd/ac 150w for my infocus sp5000. Just letting you know.

 

[jck]

Hello ywh,

I'm interested in purchasing a replacement bulb for my Sanyo PLV-70, which is a 200W UHP bulb. From what you have said in previous posts, the same size electrodes = AC (see picture). I believe I need a JYD replacement. Attached is a picture of the previous bulb that was replaced by an online rebuilder and it only lasted about 150 hours 😡 . Anyway, can you quote me the bulb and cost with shipping? Also, do you have a source for the ceramic epoxy that these bulbs are mounted with? Thanks!

 

[TonkaTuff]

Hi there,

Well, like Lumenlab, what a great site.. weeeeee...
I've just purchased an Infocus LP650 and would love to get a new bulb or two.. If any of you could possibly let me know if you can supply them, that would be great..

Also, how much to ship them to Sydney in Australia...

Cheers,
Tonks.. =]

 

[ywh]

Hi elektron
the ballast of hqi is heavy, you have to pay $30 shipping,about.

Hi Dumbfounded
the PDF is wrong, but I have never replace a UHE, no infor about UHE, there are some risk to replace a UHE.

Hi sabrex
I have to waite 18wheeler

Hi jck
yes, JYD/AC can replace your lamp, cost is $60, shipping is $5 and ceramic

Hi TonkaTuff
JYD/AC =$60, shipping is $5