hmm. No, with music no.
One question. When the amp is supposed correctly "ON" with the console but the signals wires in the air. The only speaker which sounds is the central speaker. Other speakers doesn't sound.
I don't know why do that.
More info:
The voltages when the console is ON, in de blue and white wires (previous I connect those to +8v) now they have 2,6v and 2,4v respectively :S. Is this correct? Maybe the console doesn't working well..
If I test with music, i think that only sound the central speaker 🙁
One question. When the amp is supposed correctly "ON" with the console but the signals wires in the air. The only speaker which sounds is the central speaker. Other speakers doesn't sound.
I don't know why do that.
More info:
The voltages when the console is ON, in de blue and white wires (previous I connect those to +8v) now they have 2,6v and 2,4v respectively :S. Is this correct? Maybe the console doesn't working well..
If I test with music, i think that only sound the central speaker 🙁
This indicate a problem in the "power on" circuitit could be in the console or on the pream board
turn on with the blue,white wire to +8v abd all channels should have sound
also try with orange wire maybe has diferent functions than my version
I start with black-white wire to gnd and white wire to +8 and sound is perfect
Record a video with your n73 :d to see what is going on
http://img341.imageshack.us/img341/165/110509231448.jpg
turn on with the blue,white wire to +8v abd all channels should have sound
also try with orange wire maybe has diferent functions than my version
I start with black-white wire to gnd and white wire to +8 and sound is perfect
Record a video with your n73 :d to see what is going on
http://img341.imageshack.us/img341/165/110509231448.jpg
Hello I’m new on this forum and I'm French so sorry for my poor English.
I have a new Z-5500 kit everything works fine but I want to bypass the controller pod. I'm made a schema for the connection, please tell me if he good or not:
Thanks
I have a new Z-5500 kit everything works fine but I want to bypass the controller pod. I'm made a schema for the connection, please tell me if he good or not:
An externally hosted image should be here but it was not working when we last tested it.
Thanks
i think is ok
try it
Thanks But I found another image for the Z-5500 D-Sub and is different from mine, so which one is the good ?
http://img.donanimhaber.com/upfiles/475682/7D3108711BA74CA6BA09438D5A8BD2F5.jpg
http://img31.imageshack.us/img31/9808/z5500.jpg
could you take a look inside the sub and tell me the value of that resistor or the colors or make a good photo of that board
http://i49.tinypic.com/2rgks9g.jpg
thanks
http://i49.tinypic.com/2rgks9g.jpg
thanks
could you take a look inside the sub and tell me the value of that resistor or the colors or make a good photo of that board
http://i49.tinypic.com/2rgks9g.jpg
thanks
My board in the sub is the same as the photo, the small one.
I found another image of the d-sub connector, Which one is the good ?
http://img.donanimhaber.com/upfiles/475682/7D3108711BA74CA6BA09438D5A8BD2F5.jpg
or
http://img31.imageshack.us/img31/9808/z5500.jpg
can you tell me the colors or value of the rezistor?
second image but not sure about the inputs
just ground pins 6,7,8 and touch one pin at time and see witch speaker sounds
make a photo with that board so i can see the colors on the resistor or you tell me
thanks
second image but not sure about the inputs
just ground pins 6,7,8 and touch one pin at time and see witch speaker sounds
make a photo with that board so i can see the colors on the resistor or you tell me
thanks
Here is a picture of my 5500's preamp board :
http://img7.hostingpics.net/pics/826114IMGP0524.jpghttp://img7.hostingpics.net/pics/826114IMGP0524.jpg
(4000x3000, 1.58mo)
http://img7.hostingpics.net/pics/826114IMGP0524.jpghttp://img7.hostingpics.net/pics/826114IMGP0524.jpg
(4000x3000, 1.58mo)
thanks a lot
I have others picture if you want 😉
So now are you sure that the second image is the good one ?
did you succeed to turn on the amplifiers ?
I do not have a D-sub 15 cable yet
do as i show here http://img526.imageshack.us/img526/8553/122209164739.jpgSo now are you sure that the second image is the good one ?
do as i show here http://img526.imageshack.us/img526/8553/122209164739.jpg
Thank You, I will receive the d-sub connector and 3 jack wires in 3 days
Good luck Alex 😛.
I'm not disapear; I don't have much time to do this. I will post my results in a few days 🙄
I'm not disapear; I don't have much time to do this. I will post my results in a few days 🙄
Good luck Alex 😛.
Thanks for that
I'm not disapear; I don't have much time to do this. I will post my results in a few days 🙄
Do you have the same pream board version as mine ?
Me too I wiil post my results here.
- Home
- Amplifiers
- Chip Amps
- Hacking the Logitech Z5500