Fullrange driver for John Blue 8"(JB8)
Amp:2A3(PP)
Amp:2A3(PP)
An externally hosted image should be here but it was not working when we last tested it.
andabc said:Fullrange driver for John Blue 4"(JB4)
Frequency range:52Hz~18000Hz
jb driver is my best chose
Hi andabc,
where can i find this driver ? how does it sound, compare to others 4" full ranger ?
thanks,
Gede
I am hosting pictures for Steve King. Here is his full range project.
Hope you don't mind me posting them Steve.
An externally hosted image should be here but it was not working when we last tested it.
Hope you don't mind me posting them Steve.
Bas Horneman said:I am hosting pictures for Steve King. Here is his full range project.
Is he Canadian by any chance? They look like two bears.
Two excellent bears at that!
edit: And is that a robot startled by the bears in the background?
Nope..he is a fellow countryman of yours. And the robot in the background is homemade.Is he Canadian by any chance?
http://basaudio.net/diyhosting/steve/index.html
bobhayes said:FE166E.
Plenty of poke for me, even for trance music etc.
Would you like to give some details of your cabinet design? I bought a pair of FE166E in a fit of enthusiasm but now I'm not sure how I want to use them!
Hello,
My full range dipole with FE207E, no filter, no cabinet, but a current source amplifier ( Amperotron : http://perso.wanadoo.fr/jm.plantefeve/dipolex-fig1.gif ).
First experience with 8" Monacor SP-200X : http://perso.wanadoo.fr/jm.plantefeve/dipolex.html
Jean-Marc.
My full range dipole with FE207E, no filter, no cabinet, but a current source amplifier ( Amperotron : http://perso.wanadoo.fr/jm.plantefeve/dipolex-fig1.gif ).
First experience with 8" Monacor SP-200X : http://perso.wanadoo.fr/jm.plantefeve/dipolex.html
Jean-Marc.
Attachments
ff165k
hi all;
Just wanted to show some pic.s No fancy cab, just something I built of material I had on hand. I would call it a blh. I made the horn mouth large so I could reduce the size easily. What worked best was the horn mouth covered with dense insulation; that brought the bass out. using a test cd, the output was very good in the40-60 hz area.Front and back panels are 1-1/4" thick. Outside demensions are 20x20x13". The horn exits out 2 cutouts.
hi all;
Just wanted to show some pic.s No fancy cab, just something I built of material I had on hand. I would call it a blh. I made the horn mouth large so I could reduce the size easily. What worked best was the horn mouth covered with dense insulation; that brought the bass out. using a test cd, the output was very good in the40-60 hz area.Front and back panels are 1-1/4" thick. Outside demensions are 20x20x13". The horn exits out 2 cutouts.
Attachments
- Home
- Loudspeakers
- Full Range
- Full Range Speaker Photo Gallery