Figure 13...
Am I wrong in the assumption that this beautiful pic is part of the next AudioXpress article?
2 weeks to go ...
14 days only
336 hours
20160 minutes...
manu
Am I wrong in the assumption that this beautiful pic is part of the next AudioXpress article?
2 weeks to go ...
14 days only
336 hours
20160 minutes...

manu
Speaking of time passing, today marks the 6th anniversary
of my first posting here.
Happy Anniversary, and many thanks to the organizers,
moderators, and sponsors of the best audio site on the planet.
😎
of my first posting here.
Happy Anniversary, and many thanks to the organizers,
moderators, and sponsors of the best audio site on the planet.
😎
Nelson Pass said:Speaking of time passing, today marks the 6th anniversary
of my first posting here.
.......
I wish ya at least 3 times more ........ 😉
Nelson Pass said:............................. the best audio site on the planet.
😎
I'm proud ...... I'm Mod here ..........
Attachments
Nelson Pass said:I don't need mind control. The F5 has this 200 KHz square wave.
Did I mention that the circuit has no capacitors?
Don't tease us like that! 🙂
Nelson Pass said:Speaking of time passing, today marks the 6th anniversary
of my first posting here.
Happy Anniversary, and many thanks to the organizers,
moderators, and sponsors of the best audio site on the planet.
😎
And thank you for your generous support of the DIY
community and the fun you're brought so many of us.



Cheers,
Dennis
Happy aniversary
Good for you Nelson.
Your contributions to the DIY comunity are second to none. You have done an amazing job of encouraging folks to try new things. Your open sharing of ideas has made the entire process possible.
To you sir, I raise my glass and say thank you very much
Now how about a few more teasers on the F5
Good for you Nelson.
Your contributions to the DIY comunity are second to none. You have done an amazing job of encouraging folks to try new things. Your open sharing of ideas has made the entire process possible.
To you sir, I raise my glass and say thank you very much
Now how about a few more teasers on the F5
Re: Happy aniversary
Here we are clipping into 1 ohm at 10A
SCD said:Now how about a few more teasers on the F5
Here we are clipping into 1 ohm at 10A
Attachments
Okay so you got the stability thing sorted out.
But ten amps!!!!!!
My gosh did you design a high fidelity welding machine???
But ten amps!!!!!!
My gosh did you design a high fidelity welding machine???
Hmmmmmm Sonic welding???
Not real sure. Is that anything like ultra sound.
I heard of a guy once that had a kidney stone and they used ultra sound to make it go away. You know belly on up to set of speakers get your gut real close put on some classic rock and roll turn it up ultra high and blast those stones to smith-er-eeeeens!
Anything like that?
Not real sure. Is that anything like ultra sound.
I heard of a guy once that had a kidney stone and they used ultra sound to make it go away. You know belly on up to set of speakers get your gut real close put on some classic rock and roll turn it up ultra high and blast those stones to smith-er-eeeeens!
Anything like that?
SCD said:Hmmmmmm Sonic welding???
Not real sure. Is that anything like ultra sound.
I heard of a guy once that had a kidney stone and they used ultra sound to make it go away. You know belly on up to set of speakers get your gut real close put on some classic rock and roll turn it up ultra high and blast those stones to smith-er-eeeeens!
Anything like that?
ya wanna Sonic Welder schematic ?
with 807 in PP ?

Re: Re: Happy aniversary
...And then there were walls in this New House , made of large slabs of silvery metal with great copper cables leading off into the mist...shrouding the image of the Great (B)OZ...
How fortunate for us ...Your first post six years ago.!!
Nelson Pass said:
Here we are clipping into 1 ohm at 10A
...And then there were walls in this New House , made of large slabs of silvery metal with great copper cables leading off into the mist...shrouding the image of the Great (B)OZ...
How fortunate for us ...Your first post six years ago.!!
Zen Mod said:
ya wanna Sonic Welder schematic ?
with 807 in PP ?
![]()
Please Choky, no more of that light bulb talk......no we also don't drive Ford T anymore around here 😀
Magura 🙂
Attachments
Re: Re: Happy aniversary
Seems like an ideal amp to drive a set of OB woofers....(and maybe fullrangers as well).... 😎
Nelson Pass said:I don't need mind control. The F5 has this 200 KHz square wave.
Did I mention that the circuit has no capacitors?
Nelson Pass said:
Here we are clipping into 1 ohm at 10A
Seems like an ideal amp to drive a set of OB woofers....(and maybe fullrangers as well).... 😎
Nelson Pass said:I don't need mind control. The F5 has this 200 KHz square wave.
Did I mention that the circuit has no capacitors?
That's a real gem Nelson... I would be happy with that square wave at 20K.
Being a First Watt product and of course a Pass design should be a class A amp... but 10A @ 1 Ohm must be AB?

P.S. This is a very special product... now I understand why Nelson want it published.
Nelson Pass said:Speaking of time passing, today marks the 6th anniversary
of my first posting here.
Happy Anniversary, and many thanks to the organizers,
moderators, and sponsors of the best audio site on the planet.
😎
7th, It's 2008

Nelson Pass said:Speaking of time passing, today marks the 6th anniversary
of my first posting here.
This will most probably be my only opportunity to say this to Nelson Pass: Check your math 😀 😀 😀 (you started in 2001).
Should arrive at my house about a month later...must get a thorough inspection at the border. Just got the previous one.Nelson Pass said:I am informed that AudioXpress with the F5 article will be in the
mail April 10, just 2 weeks away.
Hey, another couple months and I'll have my 6/7th anniversary as well...
No doubt information will appear on the web as soon as people
get a copy, so I don't think you'll have to wait a month.
get a copy, so I don't think you'll have to wait a month.
- Home
- Amplifiers
- Pass Labs
- DIY progress report