Hi Quanghao,
I've transferred you remaining 254+50 USD.
Please update list and send the tracking number when you'll ship the package.
Thanks, Davide
I've transferred you remaining 254+50 USD.
Please update list and send the tracking number when you'll ship the package.
Thanks, Davide
Hi Quanghao,
Please add Fedex cost for shipping to Taiwan to reference,thank you.
And Taiwan's AC Voltage is 110V,could change transport's AC input to 110V for me,thank you.
ok, I have to ask the carrier and will notify you soon.
Hello Quanghao,
Sorry , but no update for me in the udated spreadsheet (see post #553)
Br
Jacky
Sorry , but no update for me in the udated spreadsheet (see post #553)
Br
Jacky
Dear quanghao,
Thank you for removing the Amanero order for me and I hope it will not reappear again.
BTW, when will you ship out our items?
halook
Thank you for removing the Amanero order for me and I hope it will not reappear again.
BTW, when will you ship out our items?
halook
outptu stage
I am making some test with different output stage.
I have found that it is possible convert the output of the ES9018 in un-balanced so we will have 8 DAC in parallel with an outptu impedance of about 100ohm.
The DAC chip with balanced reject common-mode interference coming from power supply but here we are using the top of regulator, a hi-end linear regulator followed by an ultra fast shunt.
The balanced outputs need a differential stage to get an un-balanced signal so many component on the signal path.
I have realead a new frmware version with the possibility to change the output configuration and get an un-balanced signal on output.
You can connect directly the DAC output to your amplifier with a single capacitor or add a normal single ended stage like my DAC End with AD1865.
Here the new firmware and the manual of the remote command.
It is possible update the firmware with the cheap Pickit2 or any other clone.
I am making some test with different output stage.
I have found that it is possible convert the output of the ES9018 in un-balanced so we will have 8 DAC in parallel with an outptu impedance of about 100ohm.
The DAC chip with balanced reject common-mode interference coming from power supply but here we are using the top of regulator, a hi-end linear regulator followed by an ultra fast shunt.
The balanced outputs need a differential stage to get an un-balanced signal so many component on the signal path.
I have realead a new frmware version with the possibility to change the output configuration and get an un-balanced signal on output.
You can connect directly the DAC output to your amplifier with a single capacitor or add a normal single ended stage like my DAC End with AD1865.
Here the new firmware and the manual of the remote command.
It is possible update the firmware with the cheap Pickit2 or any other clone.
Attachments
I have paid in full (for everything except an Amanero) including shipping as of right now. Please confirm that you've received my payment when you have a chance. Thank you. Looking forward to receiving this.
Hello Quanghao,
I've just paid you 1123 USD (1080 USD + 43 USD=Shipping to South Korea) for the outstanding,
STT = 17
Nick = kgkim
Thank you.
I've just paid you 1123 USD (1080 USD + 43 USD=Shipping to South Korea) for the outstanding,
STT = 17
Nick = kgkim
Thank you.
I have found that it is possible convert the output of the ES9018 in un-balanced
Hello Andrea,
Can you explain this a little more ?
Does this mean that in this new mode there is only SE output from the ES9018?
Is I/V conversion still needed ?
Does the ES9018 run in voltage out mode? how much voltage ?
Thanks for adding new features !
Regards,
Danny
I was interested to try "poor-man's" unbalanced by using one phase of the DAC output -I have realeased a new frmware version with the possibility to change the output configuration and get an un-balanced signal on output.
by connecting to DAC+ and A_GROUND ...
As I understand it, the output impedance would remain the usual 195R (4x DAC ouputs 780R in parallel)
So Andrea you're saying that the DAC can be configured to have true unbalanced outputs?
If so, is the correct connection DAC+ and A_GROUND, or DAC+ and DAC- ?
You can set the DAC- to be in-phase with DAC+
You connect DAC+ and DAC- together, thus the output impedance is half the 195R
You connect DAC+ and DAC- together, thus the output impedance is half the 195R
Thanks glt. So let me check - each stereo channel now has 8 DAC outputs in parallel, instead of 4.
I read in the SEN thread that with 4 DAC outputs the ES9018 puts out approx 8mA. So we should now have approx 16mA output?
I read in the SEN thread that with 4 DAC outputs the ES9018 puts out approx 8mA. So we should now have approx 16mA output?
Shipping Notice
Hello, today I've sent some goods and you can track the following tracking numbers:
- Daniel: 802609632489
- Luizl: 802609632743
- Randytsuch: 802609632732
- Simon Polz: 802609632456
- Halook: 802609632467
- Misterwolf: 802609632478
I am currently waiting for test transformer and the chassis, the more you please allow me a few more days.
You pay 50% less for goods, please return to me.
Thank you!
Hello, today I've sent some goods and you can track the following tracking numbers:
- Daniel: 802609632489
- Luizl: 802609632743
- Randytsuch: 802609632732
- Simon Polz: 802609632456
- Halook: 802609632467
- Misterwolf: 802609632478
I am currently waiting for test transformer and the chassis, the more you please allow me a few more days.
You pay 50% less for goods, please return to me.
Thank you!
Last edited:
Hi Quanghao,
I just paid my remaining 50% + shipping = $325 + $169 Shipping to USA = $494.00 for Order #29 on your list.
I just paid my remaining 50% + shipping = $325 + $169 Shipping to USA = $494.00 for Order #29 on your list.
Hi Quanghao,
I just paid my remaining 50% + shipping = $325 + $169 Shipping to USA = $494.00 for Order #29 on your list.
ok, tks!
Hello, today I've sent some goods and you can track the following tracking numbers:
- Daniel: 802609632489
- Luizl: 802609632743
- Randytsuch: 802609632732
- Simon Polz: 802609632456
- Halook: 802609632467
- Misterwolf: 802609632478
I am currently waiting for test transformer and the chassis, the more you please allow me a few more days.
You pay 50% less for goods, please return to me.
Thank you!
Fedex says my package is due Tuesday 🙂
Need to start working on the rest of the box to get things ready.
Randy
- Status
- Not open for further replies.
- Home
- More Vendors...
- Quanghao Audio Design
- DAC-END R (ES9018) full assembled board