• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

DAC-END R (ES9018) full assembled board - version 2

Status
Not open for further replies.
Jump to Latest
#682
1. atterbud - Option 6 full DAC build with Super I/V output stage in place of standard
2. bsy020 - Option 6 full DAC (standard output) + PCBs for Transformer output
3. Abszero!
4. Gugi 100 (dacboard, output board, chassis)
5. smokingdog
6. feriandas - DAC module + amanero + output stage + transformer + chassis (Complete set: Item 6)
7. flocchini - option 9 without any output stage (1+3+4+5 assembled). I already purchased LL1684 board and will add it myself
8. ivigueras: 1 + 2 + 3 (DAC, DD output stage, chassis)
9. Djauweh - Option 9 Complete assembled DAC with Lundahl LL1684 output stage
10. audiomusica - Complete set (option 1+2+3+4+5) assuming this makes a complete kit like option 6 but finally assembled on my own.
11. bamarek - option 6 - complete assembled DAC with LL1684
12. Sugden - (option 9)Complete assembled DAC with Lundahl LL1684 output stage
13. Nicos - DAC module + amanero + output stage + transformer + chassis (Complete set: Item 6)
14. mjensen - (option 9) - complete assembled DAC with Lundahl LL1684 output stage
15.ingemar-(option 9)- complete assembled Dac with Lundahl LL1684 output stage(i need to bail out,sorry!!)
16.Gergar-(option 9) - complete Dac with LL1684 + 2 DD output + Op-amp output
 
#685
Welcome all!

I have started sending the DAC for you.

First, I will send the DAC kit for your choice

Then I will send the complete DAC.

This is the packaging for the DAC with chassis

I sent a letter to you on the shipping information and shipping process,

Who have received please answer me!

Special thanks to
quanghao
 

Attachments

  • Box DAC1.jpg
    Box DAC1.jpg
    215.6 KB · Views: 470
  • Box DAC2.jpg
    Box DAC2.jpg
    341.2 KB · Views: 447
  • Box DAC3.jpg
    Box DAC3.jpg
    414 KB · Views: 420
#686
Hi all!

1. V2 dac kits, I have used aluminum control whole, so there is a difference in price, I hope the doctors sent me extra money for new drivers = $ 40.

2. The DAC complete your registration please also paid more for me: $ 80 for the assembly, testing and maintenance. The DAC and you get to listen to music!

I'm so sorry because I have not said this before, because I had forgotten. I always hope that you all feel for me please!

Thank you
quanghao
 
#697
Hi Quanghao,
I received mine in nice package today 🙂 (19 April sent, 22 April received, I would say it's quick) no problems or anything with package or cargo firm 😉
Board is very nicely done, and back has the marks also for ufl, capacitor, value measure. The remote is giving a filled in hand feel. Easy reach buttons with thumb.
I'm very glad that I bought this DAC. If my budget was more allowing, I would like to buy that case or full build...
Thank you for your nicely done job again 😀
 
#699
quanghao said:
Welcome all!

I have started sending the DAC for you.

First, I will send the DAC kit for your choice

Then I will send the complete DAC.

This is the packaging for the DAC with chassis

I sent a letter to you on the shipping information and shipping process,

Who have received please answer me!

Special thanks to
quanghao
Click to expand...

Hi Quanghao
My orders are:
1. DAC2 DAC module (from DAC1 project order change to DAC2 project) + DAC2 chassis + Discrete differential no feedback output stage + another Discrete differential no feedback output stage(extra order)
2.IV Opam kit of DAC1 (60$ for 2 x IV Opam kit)
3.2 pcb kit (total 2PCB x2) and 2 Vishay MMA0204 of LL1684 output stage(super V/I)
4.Remote-control-silver-aluminum
So I should pay you Remote-control-silver cost-->$40(not yet pay to you)+ shipping cost??-->(shipping to Taiwan cost w/postal or by air)
Please check my order and shipping to me,if you have any problem ,please tell me.
It's just remind you,because my orders have more complicated,not new order.

Thank you.

Antony_shih
 
Last edited:
#700
Hi QuangHao,
Thank you for indicating me the rates of shipping for France for a complete kit.
I shall add 40 $ for the aluminum remote control and $80 for the assembly, the tests, the maintenance.
I have déja paid:
12/02/2014 450 USD Paypal 8BP45637JJ042905B
12/03/2014 450 USD Paypal 81W16224XK553972P
I am impatient to listen to the result of this excellent work!
Thank you
Claude
 
Status
Not open for further replies.
Top Bottom