CRC Power Supply (Class A amplifier)

[manniraj]

Is it possible to use this board with off board caps so that we can use 8 or more caps? Looks difficult for me but not sure as never tried off board caps especially for power amps.

thanks

 

[prasi]

Yes you could use off board caps after the crc pcb

 

[manniraj]

Yes you could use off board caps after the crc pcb

Thanks Prasi, if I understand you I can take the DC output (+ / -) from the PSU and connect to the external cap bank and from there I can connect to the amp boards right? This way I still will have the flexibility of maximum capacitance for a class A amplifier without effecting anything else in the chain!

 

[prasi]

Thanks Prasi, if I understand you I can take the DC output (+ / -) from the PSU and connect to the external cap bank and from there I can connect to the amp boards right? This way I still will have the flexibility of maximum capacitance for a class A amplifier without effecting anything else in the chain!

yes, I think you should move the ground connection(of amp and other aux circuits) too to the o/p side of your new capacitor bank. read the recommendation from Bonsai on hifisonix site.

 

[prasi]

DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 4 boards-delivered
xrk971 2 boards- shipped
Somak Maitra- 2 nos.-delivered
DIYA member thro PM - 2 boards- shipped
DIYA member thro PM - 4 boards- shipped
outtek - 2 boards- shipped
BRN- 2 boards- shipped
BEYoung-6 boards-paid

So 14 more remain of the 5 pin caps CRC PSU pcbs.

 

[prasi]

DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 4 boards-delivered
xrk971 2 boards- shipped
Somak Maitra- 2 nos.-delivered
DIYA member thro PM - 2 boards- shipped
DIYA member thro PM - 4 boards- shipped
outtek - 2 boards- shipped
BRN- 2 boards- shipped
BEYoung-6 boards-shipped
avtech23-2 boards- shipped
cosmo61 -6 boards-Invoice sent

So 6 more remain of the 5 pin caps CRC PSU pcbs.

looks like time to stock these nice boards again😀, again the talk and coordination with board house😱

I also have 5 nos. of 4-pin cap PCBs from GB-1, if anyone is willing to buy, I am ready to offer them at 40 USD delivered.

regards
Prasi

 

[prasi]

I also have 5 nos. of 4-pin cap PCBs from GB-1, if anyone is willing to buy, I am ready to offer them at 40 USD delivered.

regards
Prasi

4 nos. remaining @ 30usd all inclusive.

 

[tallishe]

Hi Prasi,

2 boards well received.

Thanks a lot!

 

[prasi]

Hello tallish,
Thank you for confirming the delivery.
Regards
Prasi

 

[prasi]

DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 4 boards-delivered
xrk971 2 boards- delivered
Somak Maitra- 2 nos.-delivered
tallishe - 2 boards- delivered
jameshillj-2 boards-delivered
DIYA member thro PM - 4 boards- shipped
outtek - 2 boards- delivered
BRN- 2 boards- shipped
BEYoung-6 boards-shipped
avtech23-2 boards- shipped
cosmo61 -6 boards-shipped

 

[U102324]

yes, I think you should move the ground connection(of amp and other aux circuits) ......

I bet it took you some hours trying to draw twisted wire 🙂

 

[prasi]

I bet it took you some hours trying to draw twisted wire 🙂

No sir!, that hard work was done by bonsai, DIYA former member
Ground Loops: How to Wire-up an Audio Amplifier for Zero Hum and Noise
and the detailed pdf is here
http://hifisonix.com/wordpress/wp-c...to-wire-up-a-Power-Amplifier-October-2017.pdf
regards
prasi

 

[BRN]

prasi,

You can mark me as delivered. The boards arrive in perfect condition. Nice and think with plenty of room for big caps.

Brad

 

[gaborbela]

Hi
I just found these GB, I would be interested to get 4pc off these PC board for a fair price and shipping to Toronto Canada
Please PM me and let me know the price with shipping cost so I can decide (if I can afford it) to place my order. I see some other thread for N American DIY-ers?
Thank you
Greetings gabor

 

[prasi]

Hello Gabor,
Thank you for your interest.
As far as I know this is the only thread where GB is happening. Only initially pinnocchio had done a limited GB for Canada.
I will send a pm to you.
Regards
Prasi

 

[prasi]

DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 4 boards-delivered
xrk971 2 boards- delivered
Somak Maitra- 2 nos.-delivered
tallishe - 2 boards- delivered
jameshillj-2 boards-delivered
DIYA member thro PM - 4 boards- delivered
outtek - 2 boards- delivered
BRN- 2 boards- delivered
BEYoung-6 boards-shipped
avtech23-2 boards- delivered
cosmo61 -6 boards-shipped

regards
Prasi

 

[cosmo61]

Hi Prasi!


Thank's very nice boards, and they are delivered.
Br Tommy

 

[prasi]

Thanks Tommy for confirmation. I think postal system is doing double shift😀, boards are getting delivered very quickly. Another parcel to Australia got delivered in 9 days straight!.

regards
Prasi

 

[prasi]

DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 6 boards-delivered
DIYA Member thro PM 4 boards-delivered
xrk971 2 boards- delivered
Somak Maitra- 2 nos.-delivered
tallishe - 2 boards- delivered
jameshillj-2 boards-delivered
DIYA member thro PM - 4 boards- delivered
outtek - 2 boards- delivered
BRN- 2 boards- delivered
BEYoung-6 boards-delivered
avtech23-2 boards- delivered
cosmo61 -6 boards-delivered
gaborbela-4 boards-

the last 2 remain of the 5 pin caps., time to order more.

 

[gaborbela]

DIYA Member thro PM 6 boards-delivered
]
gaborbela-4 boards-

the last 2 remain of the 5 pin caps., time to order more.

Hi Prasi
You got the payment and sent you an e-mail. It would be great if you could read it before you ship.
Thank you very much! for the early