No. In fact my next build will be the Beta 12cx coaxials in a K15. I have the drivers I just need compression drivers to go with them and a table saw and time to do it. I would have gotten the Beta 10cx's but received the 12's as a gift 
If cost were not an issue I would probably try the W8-1772 in a skinny K15 scaled as shown above as a full range. Alternatively, as a two way, a K15 with a B&C 15 in PA driver or a Beyma 15 in 100 dB PA driver and an Beyma TPL 150H tweeter bi- amped with active cross over would be very nice.
If cost were not an issue I would probably try the W8-1772 in a skinny K15 scaled as shown above as a full range. Alternatively, as a two way, a K15 with a B&C 15 in PA driver or a Beyma 15 in 100 dB PA driver and an Beyma TPL 150H tweeter bi- amped with active cross over would be very nice.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.