Hi Russ/Brian/Leon
just plugged in the new firmware update
reversed all switches
works fine
thanks
Excellent!
One other thing to mention is that if you use SPDIF selection you sould leave SW2 positions 1 and 2 open.
Also one side effect is that when using SPDIF4 the progress will be opposite what it was. For instance input 1 will actually be input 4 and input 4 will actually be input 1. This was not intentional, I just did not think about it until now. Still it will work just fine, just wire appropriately.
Cheers!
Russ
Last edited: