Hi all,
Couple of bits.
Firstly, If anyone requires assistance in getting the BF862, let me know. I am happy to source them and can provide the exact one i used in my own Bigbottle phonostage.
Secondly, The boards have been posted to me and should be here in a few days!
If anyone wants the BF862 posted with their boards, let me know and we will sort out the financial details.
Couple of bits.
Firstly, If anyone requires assistance in getting the BF862, let me know. I am happy to source them and can provide the exact one i used in my own Bigbottle phonostage.
Secondly, The boards have been posted to me and should be here in a few days!
If anyone wants the BF862 posted with their boards, let me know and we will sort out the financial details.
That is great news Oliver, thank you. I can get a batch of 10 (minimum order qty) from RS Components for 4 Britsh Pound delivered. Needless to say a few other components will also be added. I can at least start on the resistors, FETs, diodes etc.
Kevin
Thanks for highlighting it as a possible replacement. It's specs are very close to that of the 862 so that's a great find.
Also, far cheaper than I can get the 862 for. I'm paying £2each for legitimate ones.
Sounds great, Bigman
Can´t hardly wait
Looking forward to seeing the build pics!
Enjoy
Hi all,
The BOM has received a couple of updates.
R161 was in twice. It has been amended due to the typo (my bad!)
B861C has been included to replace the now discontinued BF862
All other values and part number remain unchanged.
View attachment BIGBOTTLE BOM - 14.01.19.pdf
The BOM has received a couple of updates.
R161 was in twice. It has been amended due to the typo (my bad!)
B861C has been included to replace the now discontinued BF862
All other values and part number remain unchanged.
View attachment BIGBOTTLE BOM - 14.01.19.pdf
Received a small envelope yesterday with the needed BF862 from a very generous Danish forum member
Thanks a million for these.
Now we only need the PCB´s
Superb,
They are on their way,!
Hi BB... Was just wondering.... And thanks for the update
Since we don´t have the schematics....
We have 2 x 7DJ8/pcc88. Could you tell if the ECC83 is wired 6.3volt or 12.6volt for the filament??
Just that I have a bunch of 6N2P-EV lying around, so these would be nice to use, if wired 6.3volts
Since we don´t have the schematics....
We have 2 x 7DJ8/pcc88. Could you tell if the ECC83 is wired 6.3volt or 12.6volt for the filament??
Just that I have a bunch of 6N2P-EV lying around, so these would be nice to use, if wired 6.3volts
Great looking group buy Oli, are you bringing one to Brooksy do next weekend?
Hi Si,
Thanks!
Unfortunately, it won't be ready. I broke my wrist, thumb and collarbone in a motorbike accident Tuesday so I can't build it at the minute.
I'll try and get to the next one.
Hey Bigman.
I believe you have the gain set to 68db for MC cartridges.
Is it possible to reduce the gain to 40db by making some resistor value changes?
Cheers
Are you thinking of using the PCB for MM?
I assume it's possible, I'm just not sure how. I can ask the question
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Bigbottle MC only Valve/JFET phonostage Group Buy