Christmas is coming early! I have been a good boy ... most of the time
And because it must be said ... Fugly!!!
🙂 Have about everything ready, just waiting for the boards to measure the lead spacings for some components, then I can trigger my shopping cart at Reichelt as well. 😀
Best regards,
Claas
well , classic case of injustice 😡
even if better of two , SissySIT is still less popular than SIT-3
Got the Cinemags yesterday, so soon total Sissiness will take over 🙂
My M2s are quite good now after a long run in period, had the house for my self yesterday and played rock at life levels. Dont think I have ever heard and felt Sabbath Ironman (remast. vinyl) like this before. 🙂 🙂 Will be fun to compare to SissySIT.
My M2s are quite good now after a long run in period, had the house for my self yesterday and played rock at life levels. Dont think I have ever heard and felt Sabbath Ironman (remast. vinyl) like this before. 🙂 🙂 Will be fun to compare to SissySIT.
Hi all,
a little progress ... only a mechanical test. The little screws / washer will changed and the bracket will be sanded and black painted or should it let it silver (alu)?
🙄
The screws (M6 ISO 7380-2 A2 V2A) from the bracket to the heatsinks get also washers, M6 screws fits perfects between the fins of the heatsinks.
And now ... family, tomorrow is a mother day!
a little progress ... only a mechanical test. The little screws / washer will changed and the bracket will be sanded and black painted or should it let it silver (alu)?
🙄The screws (M6 ISO 7380-2 A2 V2A) from the bracket to the heatsinks get also washers, M6 screws fits perfects between the fins of the heatsinks.
And now ... family, tomorrow is a mother day!
Last edited:
split washers everywhere
though , if you have standard wide case (Modushop? at least heatsinks are) , you'll have trouble with tight space in case , because of L brackets
though , if you have standard wide case (Modushop? at least heatsinks are) , you'll have trouble with tight space in case , because of L brackets
Hi ZM,
thanks for your answer!
I think about a extra case for the PS only, so that I can use for other Papa amps.
Another question, is for Iq also possible 1A2 (need not so much wattage for my speaker), thanks?
thanks for your answer!
Yes, of course!
Yes you're right it is a Modushop but it seems to fit, the rectifer will mounted on bottom in the front or at the front panel.
I think about a extra case for the PS only, so that I can use for other Papa amps.
Another question, is for Iq also possible 1A2 (need not so much wattage for my speaker), thanks?
it's possible but I think THD spectra will be worse
try it an leave where you like it
maybe you'll need change of few resistors , strictly depending of Ugs of crazy one
try it an leave where you like it
maybe you'll need change of few resistors , strictly depending of Ugs of crazy one
Assembly of a new Pass Amps case has started:
(First inhabitant will be SissySIT)
Curently working on PSU:
Looking forward to M25 / SissySIT PCBs - have already measured and set aside two pairs of THF-51S / 2SJ201 ... 😀
Best regards,
Claas
(First inhabitant will be SissySIT)
Curently working on PSU:
Looking forward to M25 / SissySIT PCBs - have already measured and set aside two pairs of THF-51S / 2SJ201 ... 😀
Best regards,
Claas
😕
With the pics themselves or with what's pictured in the pictures ?
Not opening.
Russellc
OK, on a different computer now, and here I get the same problem ...
Reposting, hope this will work better:
Reposting, hope this will work better:
Assembly of a new Pass Amps case has started:
(First inhabitant will be SissySIT)
Curently working on PSU:
Looking forward to M25 / SissySIT PCBs - have already measured and set aside two pairs of THF-51S / 2SJ201 ... 😀
Best regards,
Claas
