I confess I am dangerous with a soldering iron, just the other day I soldered my finger! It is also entertaining to read the verbal discussion going on and I have read elsewhere that Carlos-Sir does value help from other experts to fix problems he can't find the answer to. What a dull place it might be without Carlos-Sir 🙂 a very interesting individual and always willing to help you(me!)
great amp
😛Hello Mr.Carlos,, Please excuse me for not telling what version of your amp I builded It,s the ST. 😀 Everybody should build this amp they won,t be disapointed. Evette
😛Hello Mr.Carlos,, Please excuse me for not telling what version of your amp I builded It,s the ST. 😀 Everybody should build this amp they won,t be disapointed. Evette
Dear Doggy and Evette
Thank you very much...you both are very kind.
A new site (another one as Greg's site is the first and main one) is already starting to operate:
Enjoy folks:
http://www.dx.kinghost.net/
regards,
Carlos
Thank you very much...you both are very kind.
A new site (another one as Greg's site is the first and main one) is already starting to operate:
Enjoy folks:
http://www.dx.kinghost.net/
regards,
Carlos
Last edited:
Carlos I do understand you but that doesn't mean it is like you would like it to be.
I find it very objectionable that you personally attack people who don't agree with you on technical grounds. This forum is an open forum to build, discuss, exchange views etc. You tend to consider this forum, or at least this thread, as your personal playground. That will never work, unless you set up your own forum where you can set the rules and let only people on that agree with you.
If I see a design by you or anybody else, I want to be able to express my opinion even if you don't like it.
And trying to get the mods to silence people that don't agree with you is a very bad thing. For me personally, your attitude goes against everything I believe an open, tolerant society should be.
My 2 eurocents worth.
jan didden
About the blue boards.... i am not sure if it will be exactly this tone
Factory has their own standard blue tone... we gonna see exactly the day it arrive and submited to visual inspection under sunligth.
Please dear friends, help me to check the whole site... despite the man did that job (Mitchel) is very skilled, and do his work with a lot of calm...of course, some mistake may remain.
Enjoy... site made for you..to make your life easier...a place for you to capture layouts for free and to etch your own DIY boards at home.
regards,
Carlos
Factory has their own standard blue tone... we gonna see exactly the day it arrive and submited to visual inspection under sunligth.
Please dear friends, help me to check the whole site... despite the man did that job (Mitchel) is very skilled, and do his work with a lot of calm...of course, some mistake may remain.
Enjoy... site made for you..to make your life easier...a place for you to capture layouts for free and to etch your own DIY boards at home.
regards,
Carlos
Can You understand this, Your own words ? It is not attack on Your personal integrity. With the same components and budget it is possible to create (with very minor, simple modification) better , safer performing amplifier. But You do not want to hear how to do it, You are to proud to hear other opinion.
Let's multiply amplifiers dear BV...do yours...or feed your own
Give us more options.... create a circuit, a schematic, a layout, a board... explain and teach how your circuit works..help guys...offer kits, or boards, or layout, or support..do it.
I am not needing that...as you see i use to do that since several years ago..and my units are working fine...books helps me..some forum folks have teached me (while searching, researching and reading forum three times) and i can do by myself and i am not needing your help or help from others, as my units works fine..are approved by the communitty.
So, buy your own hamburguer in the place to bite a piece from another guy's hamburguer.... do your own.... this way you will be able to show your know how, will be able to make your know how usefull to your communitty..will collect to yourself good feelings and will be a real DIY..inside a DIY forum making DIY.
This amplifier is ready to go..tested.....better than ready to go.... gone..already released and tenths of guys already build...no one complained...so..what means your intervenction?...there's anything you can do to help me...despite you believe the oposite, i ensure you i will not change anything...Brazilians were football world champions because we do not change a sucessfull team.
I do not need people to listen a music in my place to say the sound is good or not...i use my own ears..and i am old enougth to be precise in such kind of things....if my human ears (alike yours) evaluate the sound as fine..there's anything others can say that will able to convince me the opposite..also happens with the ones built my amplifiers... take some time to read and you gonna see that.
Well.... we are spending bandwidth discussing that.....not beeing a builder will not receive my answer anymore...will complain about off topic to moderators and will be distant from this kind of subject because it is spending my time..when my time is to amplifiers, not for bor n ing stars.
regards,
Carlos
Give us more options.... create a circuit, a schematic, a layout, a board... explain and teach how your circuit works..help guys...offer kits, or boards, or layout, or support..do it.
I am not needing that...as you see i use to do that since several years ago..and my units are working fine...books helps me..some forum folks have teached me (while searching, researching and reading forum three times) and i can do by myself and i am not needing your help or help from others, as my units works fine..are approved by the communitty.
So, buy your own hamburguer in the place to bite a piece from another guy's hamburguer.... do your own.... this way you will be able to show your know how, will be able to make your know how usefull to your communitty..will collect to yourself good feelings and will be a real DIY..inside a DIY forum making DIY.
This amplifier is ready to go..tested.....better than ready to go.... gone..already released and tenths of guys already build...no one complained...so..what means your intervenction?...there's anything you can do to help me...despite you believe the oposite, i ensure you i will not change anything...Brazilians were football world champions because we do not change a sucessfull team.
I do not need people to listen a music in my place to say the sound is good or not...i use my own ears..and i am old enougth to be precise in such kind of things....if my human ears (alike yours) evaluate the sound as fine..there's anything others can say that will able to convince me the opposite..also happens with the ones built my amplifiers... take some time to read and you gonna see that.
Well.... we are spending bandwidth discussing that.....not beeing a builder will not receive my answer anymore...will complain about off topic to moderators and will be distant from this kind of subject because it is spending my time..when my time is to amplifiers, not for bor n ing stars.
regards,
Carlos
Last edited:
Just an accident Pavel...for a while only...you gonna see next
An exception...we let nice spanish to have some glory.
Next time will not be these nice guys
... some players there are brazilians.... could you notice that?
Just a moment for them... watch the history and you gonna see we will be there once again and many times... guaranteed!
We have a Spanish communitty here...my wife and daugthers have double Nationality...so... we are giving to them a change to be happy...for a while Pavel..just for a while.
hehehehehehe
Carlos
An exception...we let nice spanish to have some glory.
Next time will not be these nice guys
... some players there are brazilians.... could you notice that?Just a moment for them... watch the history and you gonna see we will be there once again and many times... guaranteed!
We have a Spanish communitty here...my wife and daugthers have double Nationality...so... we are giving to them a change to be happy...for a while Pavel..just for a while.
hehehehehehe
Carlos
I thought it was Netherlands who stopped Brazilian team, Netherlands : Brazil 2 :1 in quarterfinal 🙂
Yep...you are rigtht about that.
No problems to me.... they have deserved that...it is all right.🙂
I would like to take the chance to post something, to inform folks that we have now a second site with MKII kit of boards..there you can have layouts to etch by yourself if you want it:
http://www.dx.kinghost.net/
regards,
Carlos
No problems to me.... they have deserved that...it is all right.🙂
I would like to take the chance to post something, to inform folks that we have now a second site with MKII kit of boards..there you can have layouts to etch by yourself if you want it:
http://www.dx.kinghost.net/
regards,
Carlos
Last edited:
Here you will have all you need to etch boards, to produce your own
and to assemble the four models (your option):
Dx Blame ES
Dx Blame ST
Dx Blame MKII
Dx Blame MKII Supercharged.
Greg site is being updated..also the Kinghost is being checked..triple check!
We have something to fix in the kinghost...it was missed the image to the supply, the layout to photo chemical image transference to copper boards..soon we gonna have it fixed..also soon Greg will have the image to his lovely site too.
I will post all images.... missed the one i told in the last paragraph.
regards,
Carlos
and to assemble the four models (your option):
Dx Blame ES
Dx Blame ST
Dx Blame MKII
Dx Blame MKII Supercharged.
Greg site is being updated..also the Kinghost is being checked..triple check!
We have something to fix in the kinghost...it was missed the image to the supply, the layout to photo chemical image transference to copper boards..soon we gonna have it fixed..also soon Greg will have the image to his lovely site too.
I will post all images.... missed the one i told in the last paragraph.
regards,
Carlos
And even more images
You can find this into our sites...but for registration purpose, i am uploading these images here too...as this is the official place to the images to be..the main and first one place as archive from now to the ethernity.
regards,
Carlos
You can find this into our sites...but for registration purpose, i am uploading these images here too...as this is the official place to the images to be..the main and first one place as archive from now to the ethernity.
regards,
Carlos
Last edited:
And here the speaker protector
Also has insertion delay...of course!.
regards,
Carlos
A couple of images could not be attached, in special the ones are used for photo chemical image transference to copper board...these ones are too much big...so... search for them in our sites.
Also has insertion delay...of course!.
regards,
Carlos
A couple of images could not be attached, in special the ones are used for photo chemical image transference to copper board...these ones are too much big...so... search for them in our sites.
Last edited:
Brazilians beated the international orders in 20 minutes
Group buy was opened minutes ago..and we have ordered more than we have here.
I am glad to know my people is fanatic...you know...these prices...high end boards (brazil high end standards are a little less than yours) are expensive for our standards.
regards,
Carlos
Group buy was opened minutes ago..and we have ordered more than we have here.
I am glad to know my people is fanatic...you know...these prices...high end boards (brazil high end standards are a little less than yours) are expensive for our standards.
regards,
Carlos
If you need anything more, please, search Greg site or
The brazilian hosting pages in kinghost...the adress is in my signature line, down this post.
regards,
Carlos
The brazilian hosting pages in kinghost...the adress is in my signature line, down this post.
regards,
Carlos
- Status
- Not open for further replies.