You will love M2. One of the largest surprises for me was AlephJ. 6L6, when he had group buy some while back, insisted I should try this one. Bought it, assembled boards and kept them. One day not long ago, I 'decomissioned" the F6 and installed the Aleph boards and outputs.
Wow...shouldnt have waited so long. I'm probably doing same thing with my Vfet kit....and my J2 parts collection! They rest.
Russellc
Last edited:
I'm proud to be a sissie, and hapy to suggest people become sissies as well!!
This is why.
🙂 🙂 🙂
😀 😀 😀
This is why.
🙂 🙂 🙂
😀 😀 😀
My F5 and my ACA sounds really nice, but my Aleph J is amazing. I also built mine on the advice of 6l6. Thanks for the suggestion.
Proud to be a sissie.
Proud to be a sissie.
I do seem to prefer the M2 and Aleph-J over the F6, though it may come down
to mood and individual taste.
But really, what a wonderful problem to have, pondering which of these wonderful
gifts from Papa to use. Talk about embarrassment of riches. 🙂
Scranton: Might be fun to throw an M2 into the mix.
to mood and individual taste.
But really, what a wonderful problem to have, pondering which of these wonderful
gifts from Papa to use. Talk about embarrassment of riches. 🙂
Scranton: Might be fun to throw an M2 into the mix.
(might be even funnier with Babelfish M25 ; it seems I'm going to receive , finally, SOT23-6L matching socket tomorrow ..... so , believe soon to try several bstrdz
always fun with Papabreadcrumbs)
😛
always fun with Papabreadcrumbs)
😛
All: Thanks for the tips.
Dennis: is that the TeaBag MC build you are referring to?
Listened to music all night. It was like RMAF
Dennis: is that the TeaBag MC build you are referring to?
Listened to music all night. It was like RMAF
For the M2 I was thinking of the Teabag boards:
GB Pass M2 Clone Boards with 120mm UMS spacing by Tea-Bag
M2Clone boards with 120mm UMS spacing - diyAudio
(In my case, the M2 was from the factory, while the F6 and Aleph-J were diy.)
GB Pass M2 Clone Boards with 120mm UMS spacing by Tea-Bag
M2Clone boards with 120mm UMS spacing - diyAudio
(In my case, the M2 was from the factory, while the F6 and Aleph-J were diy.)
This is what I used, have 4 more stuffed boards for same. Want to build another with the Toshiba outputs. His power supply boards are the bomb also
Russellc
Pass DIY Addict
Joined 2000
Paid Member
I've made several amps (a40, multiple ACAs, and F4) all in wooden cases without any problems. Wood is easier to work with and, to my eye, looks nicer. Do make sure you have some opportunity for air circulation.
Thanks and using those giant heatsinks, mounted on top, fins facing up. I'll be sure the bottom is ventilated. Esthetics not as important as function. Also wondering how much power this will maintain with 12V.
I'm pretty sure that you know what you're thinking ........ but with so few words (about 12V ??) , you can't expect that anyone else is having a clue ......
The 12v bipolar power supply is what I have here ready for action. I have the DIY pcb for the PS but not the associated parts. just wondering if 12v will make noise.
not much of an action with 12V
I'm considering 18V as absolute minimum , to get through without penalty/punishment
don't skimp too much ....... after all ( or on start) , you're building one of the best amps around , in absolute terms
I'm considering 18V as absolute minimum , to get through without penalty/punishment
don't skimp too much ....... after all ( or on start) , you're building one of the best amps around , in absolute terms
Will it make noise? Yes. Much? No. But you are really talking about testing it, yes? Go ahead.
How much current does it have?
As might Zen Mod says, you are building one of the best amps around, build a beautiful PSU for it.
How much current does it have?
As might Zen Mod says, you are building one of the best amps around, build a beautiful PSU for it.