OK 4x4F150.....I ordered a new pot. Just removed the old scratchy one. I dont have a neat Hakko sucker so it was going into careful destructo removal mode!!
Using a small drill, drilling as many holes into the pot without hitting anything else, using some solder wick and flux to remove all of the solder I could. Then slowy prying the remainder of the pot out...she came out willingly!! Ha!
Now just need the new pot from mouser in a few days and we should be bcak to scratch free listening!!
Where there a will theres a way...
Alex
Using a small drill, drilling as many holes into the pot without hitting anything else, using some solder wick and flux to remove all of the solder I could. Then slowy prying the remainder of the pot out...she came out willingly!! Ha!
Now just need the new pot from mouser in a few days and we should be bcak to scratch free listening!!
Where there a will theres a way...
Alex
Attachments
Hey guys! 🙂 Sorry about the delayed replies.
4x4F150 - That is terrific news! Well now I know how long these 9mm pots last, under continuous use.
Alex - Your removal work is looking good!
4x4F150 - That is terrific news! Well now I know how long these 9mm pots last, under continuous use.
Alex - Your removal work is looking good!
New pot is in works just fine!!
Alex
Hey great news! I'm seeing this after sending you some other stuff just now. 🙂
AGDR,
I sent you a few emails and have not heard back?
I am hoping things are well with you!!
Hope you see this!
Alex
I sent you a few emails and have not heard back?
I am hoping things are well with you!!
Hope you see this!
Alex
No gerber/EDA project files
I just stumbled upon this thread while looking around for a version of the O2 with modern parts. Am I being stupid or are there no gerber/EDA project files for the board in the google docs folder.
I just stumbled upon this thread while looking around for a version of the O2 with modern parts. Am I being stupid or are there no gerber/EDA project files for the board in the google docs folder.
BTW, I still have AGDR's ODA in service several years after its design....still hitting it out of the park here. Had many amps over the years, sold many, but this improved O2 is indeed one of those rare amps that has stood the test of time here....
Alex
Alex
O2 Booster Boards
Hi I'm looking for the gerber files to get a couple of PCB's made for the O2 Booster Boards I have tryed the link on a few of the threads but no luck just hoping some one may have a copy of the files. Thanks in hope
Hi I'm looking for the gerber files to get a couple of PCB's made for the O2 Booster Boards I have tryed the link on a few of the threads but no luck just hoping some one may have a copy of the files. Thanks in hope
https://drive.google.com/drive/fold...ourcekey=0-aGiemJKkPtr7-byPqFhHHg&usp=sharingO2 Booster Boards
Hi I'm looking for the gerber files to get a couple of PCB's made for the O2 Booster Boards I have tryed the link on a few of the threads but no luck just hoping some one may have a copy of the files. Thanks in hope
Hope this is what you were looking for, Pm me if this link doesn't works
I like the O2 design so I looked at a few posts in this thread. It's very interesting but it is not an O2 because of negative feedback from the output stage. That and all the other changes just makes it new design which could have been done without mention of the O2 except maybe some kudos for NwAvGuy.
- Home
- Amplifiers
- Headphone Systems
- A version of an O2 Desktop Amp (ODA)