Plenty of apprentice-willingness here. Just need to wisen up iot take small steps out of GH status and closer to adoptee candidate. First step is taken, realizing I am a moron. It is really an epiphany.
Volume pot 10k is fine?
Saw a post reply that 50k pot is fine, is 10k not a sonic compromise value as well?
Saw a post reply that 50k pot is fine, is 10k not a sonic compromise value as well?
no problem, assuming that all your sources are not being in trouble, driving 10K
pretty much ok for everything, except fro some tube phono preamps of Yore
pretty much ok for everything, except fro some tube phono preamps of Yore
Thanxs zenmod
I cannot locally source the 20k and they can offer tkd 10k or 100k. I thought 100k too high maybe thats why i asked on 10k.the source is a dac which i think is around 300 - 500 ohm.
I cannot locally source the 20k and they can offer tkd 10k or 100k. I thought 100k too high maybe thats why i asked on 10k.the source is a dac which i think is around 300 - 500 ohm.
This is one wonderful sounding circuit!!
Edit: It has flesh, softness, clarity, wonderful midrange, extreme female voices, colours, etc. The soft bass is also lovely. Who cares about extreme bandwidth, cyborg bass and extreme dynamics when the offering is hours of tireless listening. Thank you, Papa!
It will take it’s place on the office desk. And later maybe to pre an AJ 🙂
Edit: It has flesh, softness, clarity, wonderful midrange, extreme female voices, colours, etc. The soft bass is also lovely. Who cares about extreme bandwidth, cyborg bass and extreme dynamics when the offering is hours of tireless listening. Thank you, Papa!
It will take it’s place on the office desk. And later maybe to pre an AJ 🙂
Last edited:
Forgive me for this Arlequin style!
I was inspired by the cromatic multicolor components and thought to give a touch of pitoresque color.
In the last two weeks saw a plastic bricks chassis and that inspired as well.
For the technical part, all perfect although i am not a electronic wizard, more incline to be a donkey! I will post feedback on sound later, i just wanted to finish the cosmetics.but the unique 3 mins it Played it calls for clarity and extension. More to follow
I was inspired by the cromatic multicolor components and thought to give a touch of pitoresque color.
In the last two weeks saw a plastic bricks chassis and that inspired as well.
For the technical part, all perfect although i am not a electronic wizard, more incline to be a donkey! I will post feedback on sound later, i just wanted to finish the cosmetics.but the unique 3 mins it Played it calls for clarity and extension. More to follow
Attachments
Last edited:
Probably this question was addressed, but could not find. Anyone running ACA and ACP+ from the same 5A 24W Meanwell?
I finally got my ACP+ into a chassis (and finally posted pics 
).
A while back I got inspiration from genechow's post #169 to do something similar. Thanks for leading the way genechow!
The software used was from post #118
Here's my spin on it, I went with the diyA Store, Steel Galaxy, 230 x 170 x 1U. It just fits if you remove the board mounted RCA and power jacks.
The big heat sink ties to the lid for more stability and a little heat conduction. I love this little head amp. 🙂
).A while back I got inspiration from genechow's post #169 to do something similar. Thanks for leading the way genechow!
The software used was from post #118
Here's my spin on it, I went with the diyA Store, Steel Galaxy, 230 x 170 x 1U. It just fits if you remove the board mounted RCA and power jacks.
The big heat sink ties to the lid for more stability and a little heat conduction. I love this little head amp. 🙂
Attachments
Last edited:
